Our golden customer service is satisfying, we have many loyal customer
We not only provide high-quality GB0-382 vce files but also satisfying customer service.
Firstly,we promise all candidates can pass exam if they master all questions and answers of H3C GB0-382 dumps pdf materials. Unluckily if you fail the exam we will refund all the cost you paid us based on your unqualified score.
Secondly,we are 7*24 on-line service. No matter when you contact us about our GB0-382 vce files we can reply you in two hour. If you have any question about our vce dumps we will help you clear.
Thirdly,we provide GB0-382 dumps free demo download and GB0-382 vce free demo download. You can tell if our official GB0-382 vce files are suitable for you before purchasing based on the free demo download.
Fourthly,if you want to build long-term cooperation with us, we can discuss a discount. We also have discount for regular customer who passed GB0-382 with the help of GB0-382 vce files and want to purchase other H3C H3CSE-RS-RT dumps vce.
Our GB0-382 vce files are valid, latest and accurate
We are a strong company which has experienced education department and IT department. Our education department staff is busy on editing new version of GB0-382 vce files every day. Once they updates, the IT department staff will unload these update version of GB0-382 dumps pdf to our website. Our professional system can automatically check the updates and note the IT staff to operate. Our complete and excellent system makes us feel confident to say all GB0-382 vce files are valid and the latest. All our education experts have more than ten years' experience on editing H3C certification examinations dumps so that we are sure that all our GB0-382 vce files are accurate. That's why we have high pass rate of H3CSE-Routing & Switching and good reputation in this line, if candidates master all the questions and answers of GB0-382 dumps pdf before the real test we guarantee you pass exam 100% for sure.
We guarantee 100% pass exam, No Help, No Pay
Don't hesitate, choose us now! Based on the passing rate data of GB0-382 vce files recent years we guarantee 100% pass exam. After many years of operation we have not only experience education experts but also stable relationship with H3C and information resources about GB0-382 vce files. So our high passing rate of GB0-382. We promise: No Help, No Pay.
After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
If you are still upset about the coming H3C H3CSE-RS-RT and afraid of failure I will advise you consider our GB0-382 vce files. Everyone knows the regular pass rate of GB0-382 is low, that's why these certifications are being valued. That's why we exist and be growing faster. VCEDumps GB0-382 vce files can help you pass exams 100% for sure. Many people pass exam and get certifications under the help of our GB0-382 dumps pdf. Our passing rate for H3CSE-RS-RT is high up to 96.87%. Nearly there are more than 100000+ candidates pass the exams every year by using our GB0-382 vce files.
H3C GB0-382 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Switching Technologies | 20%-30% | - EtherChannel - STP and RSTP - VLAN Concepts - Inter-VLAN Routing |
| Network Optimization and Troubleshooting | 15%-25% | - Performance Monitoring - QoS Basics - Route and Switch Troubleshooting |
| Fundamentals of Routing & Switching | 10%-20% | - Subnetting and VLSM - IPv4/IPv6 Addressing - OSI and TCP/IP Models |
| Routing Technologies | 30%-40% | - Static Routing - BGP Basics - RIP/RIPv2 - OSPF Fundamentals |
H3CSE-RS-RT Sample Questions:
路由器 RTA 与 RTB 之间建立了 BGP 连接并互相学习到了路由。 [RTA 与 RTB 都使用缺省定时器。
如果路由器间链路拥塞,导致 RTA 收不到 RTB 发出的 Keepalive 消息,则会发生以下哪个后果 ?
- A. 180 秒后, RTA 认为邻居失效,并删除从 RTB 学来的路由
- B. 90 秒后, RTA 认为邻居失效,并删除从 RTB 学来的路由
- C. 30 秒后, RTA 认为邻居失效,并删除从 RTB 学来的路由
- D. 120 秒后, RTA 认为邻居失效,并删除从 RTB 学来的路由
Correct Answer: A 🗳️
如图, RTA 、 RTB 、 RTC 运行 OSPF ,进程号为 100 ； RTA 、 RTB 、 RTD 间运行 OSPF 进程 200 。所有互联链路的 cost 都设置为 10 。在 RTA 和 RTB 上设置 OSPF 100 的外部路由优先级为 190 ,在 RTC 上将一条外部路由 172.16.1.0/24 引入 OSPF100 。 RTA 设置将 OSPF100 的路由引入到 OSPF200 , RTB 上设置将 OSPF200 的路由重新引入到 OSPF100 。运行稳定后假设 RTC 上引入外部路由 172.16.1.0/24 突然消失。
根据以上场景分析,下面描述不正确的是。
- A. RTD 上 172.16.1.0/24 的路由消失
- B. RTD 上 172.16.1.0/24 的路由仍旧存在,下一跳指向 RTA
- C. RTC 上 172.16.1.0/24 的路由消失
- D. RTC 上 172.16.1.0/24 的路由仍旧存在,下一跳指向 RTB
Correct Answer: A,C 🗳️
在 MSR 路由器 RTA 上执行 displaospf interface 命令后,路由器输出如下 :
OSPF Process 1 with Router ID 2.2.2.2
Interfaces
Area: 0.0.0.0
IP Address Tpe State Cost Pri DR BDR
192.168.1.1 Broadcast BDR 1 1 192.168.1.2 192.168.1.1
从以上输出可以判断。
- A. 当前接口的 IP 地址是 192.168.1.1
- B. 当前接口的 OSPF 网络类型是 Broadcast
- C. RTA 在该接口所处的网段中被选举为 DR
- D. RTA 的 OSPF 进程 1 的 Router ID 是 2.2.2.2
Correct Answer: A,B,D 🗳️
RTA 、 RTB 、 RTC 和 RTD 上分别执行如下配置 :
[RTA] ospf 1 router-id 1.1.1.1
[RTA-ospf-1] area 0
[RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
[RTB] ospf 1 router-id 2.2.2.2
[RTB-ospf-1] area 0
[RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[RTB-ospf-1] area 1
[RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
[RTB-ospf-1-area-0.0.0.1] vlink-peer 3.3.3.3
[RTC] ospf 1 router-id 3.3.3.3
[RTC-ospf-1] area 1
[RTC-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
[RTC-ospf-1-area-0.0.0.1] network 3.3.3.3 0.0.0.0
[RTC-ospf-1-area-0.0.0.1] vlink-peer 2.2.2.2
[RTC-ospf-1] area 2
[RTC-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
[RTD] ospf 1 router-id 4.4.4.4
[RTD-ospf-1] area 2
[RTD-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
[RTD-ospf-1-area-0.0.0.2] network 4.4.4.4 0.0.0.0
那么在 RTC 在 OSPF 区域内的路由器类型为
- A. 骨干路由器
- B. ABR
- C. ABR
- D. 区域内路由器
Correct Answer: A,B 🗳️
在如图所示的拓扑中, RTA 、 RTB 、 RTC 和 RTD 上分别执行如下配置 :
[RTA] ospf 1 router-id 1.1.1.1
[RTA-ospf-1] area 0
[RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
[RTB] ospf 1 router-id 2.2.2.2
[RTB-ospf-1] area 0
[RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[RTB-ospf-1] area 1
[RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
[RTC] ospf 1 router-id 3.3.3.3
[RTC-ospf-1] area 1
[RTC-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
[RTC-ospf-1] area 2
[RTC-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
[RTC-ospf-1-area-0.0.0.2] network 3.3.3.3 0.0.0.0
[RTD] ospf 1 router-id 4.4.4.4
[RTD-ospf-1] area 2
[RTD-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
[RTD-ospf-1-area-0.0.0.2] network 4.4.4.4 0.0.0.0
那么在 RTD 上可以观察到的路由有
- A. 192.168.2.0/24
- B. 192.168.3.0/24
- C. 3.3.3.3/32
- D. 1.1.1.1/32
Correct Answer: B,C 🗳️
Viewing page 1 out of 106 pages.
Viewing questions 1-5 out of 530 questions.
