100% Pass Your NSE5_FAZ-6.2 Exam Dumps at First Attempt with VCEDumps
Penetration testers simulate NSE5_FAZ-6.2 exam PDF
NEW QUESTION 21
On the RAID management page, the disk status is listed as
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is functioning normally
- B. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- C. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- D. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
Answer: B
NEW QUESTION 22
Which statements are correct regarding FortiAnalyzer reports? (Choose two)
- A. FortiAnalyzer provides the ability to create custom reports.
- B. FortiAnalyzer glows you to schedule reports to run.
- C. FortiAnalyzer includes pre-defined reports only.
- D. FortiAnalyzer allows reporting for FortiGate devices only.
Answer: A,B
NEW QUESTION 23
FortiAnalyzer uses the Optimized Fabric Transfer Protocol (OFTP) over SSL for which purpose?
- A. To send an identical set of logs to a second logging server
- B. To encrypt log communication between devices
- C. To prevent log modification during backup
- D. To upload logs to an SFTP server
Answer: A
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/109281/oftp-optimized- fabric-transfer-protocol#:~:text=The%20Optimized%20Fabric%20Transfer%20Protocol,and%2For%
20FortiManager)%20unit.
NEW QUESTION 24
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A remote LDAP server
- B. A trusted host profile that restricts access to the LDAP group
- C. An administrator group
- D. A local wildcard administrator account
Answer: A,D
Explanation:
Explanation/Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38567
NEW QUESTION 25
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can be used to facilitate communication between devices in same Security Fabric
- B. It can include only FortiGate devices that are part of the same Security Fabric
- C. It can include all Fortinet devices that are part of the same Security Fabric
- D. It can be used for fast data processing and log correlation
Answer: B,D
NEW QUESTION 26
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
- A. Identity collector
- B. Principal
- C. Service provider
- D. Identity provider
Answer: C,D
NEW QUESTION 27
What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons? (Choose three)
- A. TACACS+
- B. Local
- C. PKI
- D. LDAP
- E. RADIUS
Answer: A,D,E
NEW QUESTION 28
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. sqlplugind
- B. logfiled
- C. miglogd
- D. oftpd
Answer: C
NEW QUESTION 29
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?
- A. Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve
- B. Configure local DNS servers on FortiAnalyzer
- C. Resolve IP addresses on FortiGate
- D. Configure # set resolve-ip enable in the system FortiView settings
Answer: D
Explanation:
Explanation/Reference: https://forum.fortinet.com/tm.aspx?m=156950
NEW QUESTION 30
You have recently grouped multiple FortiGate devices into a single ADOM. System Settings > Storage Info shows the quota used.
What does the disk quota refer to?
- A. The maximum disk utilization for the ADOM type
- B. The maximum disk utilization for each device in the ADOM
- C. The maximum disk utilization for the FortiAnalyzer model
- D. The maximum disk utilization for all devices in the ADOM
Answer: C
NEW QUESTION 31
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.)
- A. IM
- B. SNMP
- C. Email
- D. SMS
Answer: B,C
NEW QUESTION 32
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)
- A. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
- B. IPsec cannot be enabled if SSL is enabled as well.
- C. Must establish an IPsec tunnel ID and pre-shared key.
- D. IPsec is only enabled through the CLI on FortiAnalyzer.
Answer: B
NEW QUESTION 33
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server?
(Choose two.)
- A. SFTP, FTP, or SCP server
- B. Mail server
- C. Report scheduling
- D. Output profile
Answer: A,D
NEW QUESTION 34
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?
- A. Dataset Library
- B. Chart Builder
- C. Custom View
- D. Export to Report Chart
Answer: B
NEW QUESTION 35
You've moved a registered logging device out of one ADOM and into a new ADOM. What happens when you rebuild the new ADOM database?
- A. FortiAnalyzer migrates analytics logs to the new ADOM.
- B. FortiAnalyzer migrates archive logs to the new ADOM.
- C. FortiAnalyzer removes logs from the old ADOM.
- D. FortiAnalyzer resets the disk quota of the new ADOM to default.
Answer: A
NEW QUESTION 36
On FortiAnalyzer, what is a wildcard administrator account?
- A. An account that validates against any user account on a FortiAuthenticator
- B. An account that permits access to members of an LDAP group
- C. An account that requires two-factor authentication
- D. An account that allows guest access with read-only privileges
Answer: A
NEW QUESTION 37
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A remote LDAP server
- B. A trusted host profile that restricts access to the LDAP group
- C. An administrator group
- D. A local wildcard administrator account
Answer: A,D
NEW QUESTION 38
View the Exhibit:
Why is the total quota less than the total system storage?
- A. The oftpd process has not archived the logs yet
- B. The logfiled process is just estimating the total quota
- C. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
- D. 3.6% of the system storage is already being used.
Answer: C
NEW QUESTION 39
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with SSL? (Choose two.)
- A. FortiAnalyzer encryption level must be equal to, or higher than, FortiGate.
- B. SSL encryption levels are globally set on FortiAnalyzer.
- C. SSL is the default setting.
- D. SSL can send logs in real-time only.
- E. SSL communications are auto-negotiated between the two devices.
Answer: B,C
NEW QUESTION 40
How does FortiAnalyzer retrieve specific log data from the database?
- A. SQL EXTRACT statement
- B. SQL GET statement
- C. SQL SELECT statement
- D. SQL FROM statement
Answer: C
NEW QUESTION 41
What is the purpose of a predefined template on the FortiAnalyzer?
- A. It specifies report settings which contains time period, device selection, and schedule
- B. It contains predefined data to generate mock reports
- C. It specifies the report layout which contains predefined texts, charts, and macros
- D. It can be edited and modified as required
Answer: C
NEW QUESTION 42
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
- A. Custom datasets
- B. Report settings
- C. Output profiles
- D. Report scheduling
Answer: A
NEW QUESTION 43
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?
- A. Hot swap the disk
- B. Shut down FortiAnalyzer and replace the disk
- C. Replace the disk and rebuild the RAID manually
- D. Take no action if the RAID level supports a failed disk
Answer: C
NEW QUESTION 44
When you perform a system backup, what does the backup configuration contain? (Choose two.)
- A. Authorized devices logs
- B. Device list
- C. Generated reports
- D. System information
Answer: B,D
NEW QUESTION 45
......
All NSE5_FAZ-6.2 Dumps and Training Courses: https://www.vcedumps.com/NSE5_FAZ-6.2-examcollection.html
