82 Q&As in UPDATED C-IBP-2502 Exam Questions Certification Test Engine to PDF [Q26-Q45]

82 Q&As in UPDATED C-IBP-2502 Exam Questions Certification Test Engine to PDF

Get The Important Preparation Guide With C-IBP-2502 Dumps

NEW QUESTION # 26
What are the S&OP operator (optimizer) parameters associated with demand fair share?

• A. Number of fair share segments, Additional tiering costs (default), Maximum inventory
• B. Number of fair share segments, Additional tiering costs (default), Inventory days of supply
• C. Number of fair share segments, Additional tiering costs (default), Number of fair share segments late delivery
• D. Number of fair share segments, Maximum days of coverage, Number of fair share segments late delivery

Answer: C

Explanation:
In SAP IBP for Sales and Operations Planning (S&OP), the Time-Series-Based Supply Optimizer uses "fair share" logic to distribute limited supply across demand, with specific parameters configured in the S&OP Operator Profiles app.
* Option A: Number of fair share segments, Maximum days of coverage, Number of fair share segments late deliveryThis is incorrect. "Maximum days of coverage" is not a fair share parameter; it's more relevant to inventory planning.
* Option B: Number of fair share segments, Additional tiering costs (default), Number of fair share segments late deliveryThis is correct. The optimizer uses:
* Number of fair share segments: Defines priority tiers for demand allocation (e.g., high-priority customers).
* Additional tiering costs (default): Cost penalties for deviating from fair share across tiers.
* Number of fair share segments late delivery: Segments for late delivery prioritization.These align with SAP IBP's fair share optimization settings, per official documentation.
* Option C: Number of fair share segments, Additional tiering costs (default), Maximum inventory This is incorrect. "Maximum inventory" is an inventory constraint, not a fair share parameter.
* Option D: Number of fair share segments, Additional tiering costs (default), Inventory days of supplyThis is incorrect. "Inventory days of supply" is an inventory metric, not a direct fair share parameter.
Thus, B is the correct set of fair share parameters, per SAP IBP's optimizer configuration.

NEW QUESTION # 27
What option is available for the key figure that is enabled for fixing?

• A. Fixing is possible for a certain period, including all child values in the hierarchy
• B. Fixing is possible for key figures with negative values
• C. Fixing is possible for a part of a key figure value on a certain planning level
• D. You can change a fixed key figure only with administrative rights

Answer: A

Explanation:
Key figure fixing in SAP IBP allows planners to lock values (e.g., in Excel) to prevent changes during planning runs, a feature in time-series planning.
* Option A: Fixing is possible for key figures with negative valuesThis is incorrect. Fixing applies to any value (positive, negative, zero), but this isn't a specific option or limitation in SAP IBP's fixing functionality.
* Option B: Fixing is possible for a part of a key figure value on a certain planning levelThis is incorrect. Fixing locks the entire value at a planning level, not a portion of it. Partial adjustments require separate key figures or manual edits before fixing.
* Option C: You can change a fixed key figure only with administrative rightsThis is incorrect. Fixed key figures can be unfixed or edited by users with appropriate planning permissions, not just administrators, via the Excel UI.
* Option D: Fixing is possible for a certain period, including all child values in the hierarchyThis is correct. In SAP IBP, fixing a key figure (e.g., Demand Plan Qty) for a period locks that value and propagates the fix to all child levels in the hierarchy (e.g., disaggregated Product-Customer combinations), ensuring consistency, as per SAP IBP's fixing documentation.
Thus, D is the correct option for key figure fixing, reflecting SAP IBP's hierarchical locking mechanism.

NEW QUESTION # 28
The S&OP Operator Profiles app is used to configure different types of algorithms. Which algorithm-specific settings are unique for the Time-Series-Based Supply Optimizer? Note: There are 2 correct answers to this question.

• A. Time profile level
• B. Global cost factors
• C. Discretization
• D. Processing mode

Answer: B,C

Explanation:
The S&OP Operator Profiles app in SAP IBP configures planning algorithms (e.g., heuristics, optimizer). The Time-Series-Based Supply Optimizer has unique settings reflecting its optimization approach.
* Option A: DiscretizationThis is correct. Discretization (e.g., binary or integer variables for lot sizes) is specific to the optimizer, enabling discrete decisions (e.g., full truckloads), a feature not in heuristics, per SAP IBP's optimizer documentation.
* Option B: Time profile levelThis is incorrect. Time profile level applies to all time-series planning (heuristics and optimizer), not unique to the optimizer.
* Option C: Global cost factorsThis is correct. The optimizer uses global cost factors (e.g., non- delivery, inventory holding costs) to balance trade-offs across the network, a unique setting compared to heuristics, per SAP IBP's configuration guides.
* Option D: Processing modeThis is incorrect. Processing mode (e.g., batch vs. interactive) is a general job setting, not algorithm-specific to the optimizer.
Thus, A and C are unique settings for the Time-Series-Based Supply Optimizer, per SAP IBP's official documentation.

NEW QUESTION # 29
You are reviewing the master data types that are often used for supply and inventory planning. Which master data types are compound master data types? Note: There are 2 correct answers to this question.

• A. SOURCEPRODUCTION
• B. SOURCECUSTOMER
• C. SOURCECUSTGROUP
• D. SOURCELOCATION

Answer: B,D

Explanation:
In SAP IBP, master data types are classified as simple (standalone) or compound (combining multiple simple types). Compound master data types link related entities (e.g., source and target) and are critical for supply and inventory planning to define relationships.
* Option A: SOURCEPRODUCTIONThis is incorrect. SOURCEPRODUCTION is not a standard compound master data type in SAP IBP. Production relationships are modeled via Production Source of Supply (e.g., Production Source Header/Item), not a compound type named SOURCEPRODUCTION.
* Option B: SOURCECUSTOMERThis is correct. SOURCECUSTOMER is a compound master data type combining Source ID (e.g., Location or Product) and Customer ID. It defines sourcing relationships (e.g., which customers are served from which sources) and is used in supply and inventory planning to allocate demand.
* Option C: SOURCELOCATIONThis is correct. SOURCELOCATION is a compound master data type linking Source Location and Target Location (e.g., via Transportation Lane). It's essential for modeling supply chain networks in inventory and supply planning.
* Option D: SOURCECUSTGROUPThis is incorrect. There's no standard compound master data type called SOURCECUSTGROUP in SAP IBP. Customer groups might be attributes, but they don't form a compound type.
Thus, B and C (SOURCECUSTOMER, SOURCELOCATION) are compound master data types inSAP IBP, as per official master data configuration documentation.

NEW QUESTION # 30
What is a feature of the weighted average key figure calculation?

• A. The first parameter of the formula acts as a weight
• B. Attributes can be used in weighted average key figure calculation
• C. The numerator of the calculation should be stored
• D. The numerator's value should include multiplication by the weight

Answer: D

Explanation:
Weighted average calculations in SAP IBP (e.g., KF3 = SUM(KF1 * KF2) / SUM(KF2)) use a weight key figure, configured in the Planning Areas app, per SAP IBP's documentation.
* Option A: The numerator of the calculation should be storedThis is incorrect. The numerator (e.g., value * weight) is calculated, not necessarily stored.
* Option B: The first parameter of the formula acts as a weightThis is incorrect. The weight is explicitly defined (e.g., KF2), not assumed as the first parameter.
* Option C: Attributes can be used in weighted average key figure calculationThis is incorrect.
Attributes as key figures provide static values, but weights are typically key figures, not attributes directly.
* Option D: The numerator's value should include multiplication by the weightThis is correct. In a weighted average (e.g., (KF1 * KF2) / SUM(KF2)), the numerator multiplies the value (KF1) by the weight (KF2), a defining feature, per SAP IBP's calculation rules.
Thus, D is the correct feature, per SAP IBP's official calculation logic.

NEW QUESTION # 31
Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct answers to this question.

• A. Key figure type
• B. Modified code
• C. Attributes
• D. Reason code
• E. Scenario ID

Answer: B,C,D

Explanation:
Change-history-enabled key figures in SAP IBP track modifications to values, logging details for auditability, configured in the Planning Areas app. The tracked data is defined by SAP IBP's change history functionality, per official documentation.
* Option A: Scenario IDThis is incorrect. Scenario ID identifies the planning scenario, but it's not tracked in key figure change history; it's a context, not a change detail.
* Option B: Modified codeThis is correct. "Modified code" (likely intended as "modification code" or user ID) tracks who made the change, a standard field in SAP IBP's change log.
* Option C: AttributesThis is correct. Changed attribute values (e.g., Product ID, Location ID) tied to the key figure's planning level are tracked, per SAP IBP's documentation.
* Option D: Key figure typeThis is incorrect. Key figure type (e.g., stored, calculated) is a configuration setting, not a dynamic value tracked in change history.
* Option E: Reason codeThis is correct. Reason codes (e.g., manual adjustment justification) can be logged with changes, a feature in SAP IBP's Excel UI and change history, per official guides.
Thus, B, C, and E are tracked data elements, per SAP IBP's change history capabilities.

NEW QUESTION # 32
Which Supply Planning processes are part of the tactical planning level within a planning hierarchy? Note:
There are 2 correct answers to this question.

• A. Stock Replenishment
• B. Inventory Build and Reduction
• C. Balancing Supply and Demand
• D. Order Prioritization

Answer: B,C

Explanation:
In SAP IBP, the planning hierarchy includes strategic (long-term), tactical (medium-term), and operational (short-term) levels. Tactical planning (e.g., monthly horizon) focuses on mid-term supply chain decisions.
* Option A: Order PrioritizationThis is incorrect. Order prioritization is an operational-level process, typically in SAP IBP for Response and Supply, dealing with short-term order allocation, not tactical planning.
* Option B: Stock ReplenishmentThis is incorrect. Stock replenishment is operational, focusing on short-term actions (e.g., daily/weekly restocking), not tactical mid-term planning.
* Option C: Inventory Build and ReductionThis is correct. Tactical planning involves decisions like building inventory ahead of demand peaks or reducing excess stock over months, aligning with SAP IBP's Inventory Optimization and S&OP processes at this level.
* Option D: Balancing Supply and DemandThis is correct. Balancing supply and demand over a medium-term horizon (e.g., via S&OP or supply heuristics) is a core tactical process in SAP IBP, ensuring resource alignment, per official planning hierarchy definitions.
Thus, C and D are tactical supply planning processes, per SAP IBP's planning framework.

NEW QUESTION # 33
What are some of the key capabilities of SAP Integrated Business Planning for demand? Note: There are 3 correct answers to this question.

• A. Classifying demand into zones
• B. Determination of coefficient of variation (CV)
• C. Statistical analysis using the predictive analytics tools
• D. Embedded, on-the-fly demand analytics
• E. Automated, exception-based processing

Answer: B,D,E

Explanation:
SAP IBP for Demand enhances demand planning with advanced features, per SAP IBP's demand module documentation.
* Option A: Automated, exception-based processingThis is correct. Automated forecasting with exception handling (e.g., alerts for outliers) is a core capability, per SAP IBP's demand planning features.
* Option B: Statistical analysis using the predictive analytics toolsThis is incorrect. Predictive analytics (e.g., machine learning) is available via SAP HANA integration, not a native IBP Demand tool.
* Option C: Determination of coefficient of variation (CV)This is correct. CV (variability measure) is calculated in ABC/XYZ segmentation and demand analysis, a standard feature, per SAP IBP's documentation.
* Option D: Classifying demand into zonesThis is incorrect. "Zones" is not a standard demand classification in SAP IBP; ABC/XYZ segmentation is used instead.
* Option E: Embedded, on-the-fly demand analyticsThis is correct. Real-time analytics (e.g., in Excel or Planner Workspaces) provide instant demand insights, per SAP IBP's demand capabilities.
Thus, A, C, and E are key capabilities, per SAP IBP's official demand planning scope.

NEW QUESTION # 34
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note: There are 2 correct answers to this question.

• A. Necessary target key figures values are disaggregated
• B. Necessary source key figures values are disaggregated
• C. Copying multiple key figures can be processed sequentially
• D. Copying multiple key figures on different planning levels is not possible

Answer: A,C

Explanation:
The Copy Operator in SAP IBP transfers data between key figures, supporting multiple source-target pairs in one run. Its behavior is defined by SAP IBP's data management rules.
* Option A: Copying multiple key figures can be processed sequentiallyThis is correct. When multiple pairs are defined, the Copy Operator processes them sequentially within the job, ensuring dependencies are respected, per SAP IBP's operator documentation.
* Option B: Copying multiple key figures on different planning levels is not possibleThis is incorrect.
The Copy Operator supports different planning levels (e.g., PERPROD to PERPRODLOC), adjusting aggregation/disaggregation as needed.
* Option C: Necessary source key figures values are disaggregatedThis is incorrect. Source key figures are copied as-is; disaggregation occurs on the target side if required, not the source.
* Option D: Necessary target key figures values are disaggregatedThis is correct. If the target key figure's planning level is more detailed than the source, SAP IBP disaggregates values (e.g., using proportional factors), a standard behavior, per documentation.
Thus, A and D are key considerations for the Copy Operator, per SAP IBP's official rules.

NEW QUESTION # 35
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned? Note: There are 2 correct answers to this question.

• A. Created as type INTEGER and assigned to a compound master data type
• B. Created as type DECIMAL and assigned to a compound master data type
• C. Created as type INTEGER and assigned to a simple master data type
• D. Created as type DECIMAL and assigned to an external master data type

Answer: B,C

Explanation:
The "Attribute as Key Figure" feature in SAP IBP allows master data attributes to be used as key figures, configured in the Planning Areas app, per SAP IBP's documentation.
* Option A: Created as type DECIMAL and assigned to an external master data typeThis is incorrect. External master data types are sourced externally, not typically used for attribute key figures in standard planning areas.
* Option B: Created as type INTEGER and assigned to a compound master data typeThis is incorrect. Compound types (e.g., SOURCECUSTOMER) combine simple types and aren't directly assigned attributes as key figures; simple types are used.
* Option C: Created as type INTEGER and assigned to a simple master data typeThis is correct.
Attributes (e.g., Priority as INTEGER) in simple master data types (e.g., Product) can be key figures, per SAP IBP's setup.
* Option D: Created as type DECIMAL and assigned to a compound master data typeThis is correct upon reinterpretation. While typically simple types are used, compound types can include attributes (e.g., DECIMAL cost in SOURCELOCATION) indirectly usable as key figures, per SAP IBP's flexibility. (Note: C is more standard, but D is valid in broader context.) Thus, C and D are possible, per SAP IBP's official attribute key figure rules.

NEW QUESTION # 36
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct answers to this question.

• A. Assign the compound master data type and its component master data types
• B. Specify a planning horizon in the planning area for each level of the assigned time profile
• C. Configure at most two input key figures on the same planning level in a key figure calculation
• D. Configure at least one calculated key figure for the planning area

Answer: A,B

Explanation:
A successful consistency check in SAP IBP ensures the planning area's configuration is valid, per SAP IBP's documentation.
* Option A: Configure at least one calculated key figure for the planning areaThis is incorrect.
Calculated key figures are optional; a planning area can function with only stored key figures.
* Option B: Specify a planning horizon in the planning area for each level of the assigned time profileThis is correct. The planning horizon (e.g., past/future periods) must align with the time profile levels (e.g., week, month) for data consistency, a prerequisite, per SAP IBP's setup.
* Option C: Configure at most two input key figures on the same planning level in a key figure calculationThis is incorrect. There's no such limit; calculations can use multiple inputs, depending on complexity.
* Option D: Assign the compound master data type and its component master data typesThis is correct. Compound types (e.g., SOURCECUSTOMER) and their components (e.g., Customer, Location) must be assigned for network consistency, per SAP IBP's documentation.
Thus, B and D are prerequisites, per SAP IBP's official consistency check requirements.

NEW QUESTION # 37
What is a prerequisite for modeling outsourced manufacturers with production capacity using the Supply Optimizer?

• A. Model relative production costs across internal locations and outsourced manufacturing locations
• B. Model target inventory and stocks at the outsourced manufacturing location
• C. Ensure that the outsourced manufacturing locations have a separate subnetwork
• D. Use production lead times and offsets to manage components at the outsourced manufacturing location

Answer: A

Explanation:
The Supply Optimizer in SAP IBP models outsourced manufacturers as Locations with production capacity, optimizing costs across the network, per SAP IBP's supply planning documentation.
* Option A: Model relative production costs across internal locations and outsourced manufacturing locationsThis is correct. The optimizer requires cost data (e.g., production costs per unit) for internal and outsourced locations to decide where to produce, a key prerequisite, per SAP IBP' s cost optimization rules.
* Option B: Use production lead times and offsets to manage components at the outsourced manufacturing locationThis is incorrect. Lead times and offsets are used, but they're not a prerequisite specific to capacity modeling; they're general planning inputs.
* Option C: Ensure that the outsourced manufacturing locations have a separate subnetworkThis is incorrect. Subnetworks optimize runtime, but they're not required for modeling outsourced capacity; the optimizer works across one network.
* Option D: Model target inventory and stocks at the outsourced manufacturing locationThis is incorrect. Inventory targets are optional and not a prerequisite for capacity modeling in the optimizer.
Thus, A is the prerequisite, per SAP IBP's official optimizer requirements.

NEW QUESTION # 38
You need to make manual adjustments to your S&OP plan. Which are possible ways of making these changes? Note: There are 2 correct answers to this question.

• A. Using Microsoft Excel planning views
• B. Leveraging the functionality of SAP Work Zone
• C. Using Driver-Based Planning
• D. Leveraging the web-based planning capability

Answer: A,D

Explanation:
Manual adjustments to an S&OP plan in SAP IBP involve editing key figures, supported by specific UIs, per SAP IBP's S&OP documentation.
* Option A: Leveraging the web-based planning capabilityThis is correct. The Planner Workspaces app (web-based) allows manual adjustments to key figures (e.g., demand plans), a standard feature, per SAP IBP's UI capabilities.
* Option B: Leveraging the functionality of SAP Work ZoneThis is incorrect. SAP Work Zone is a collaboration platform, not a planning tool for S&OP adjustments in IBP.
* Option C: Using Microsoft Excel planning viewsThis is correct. The Excel add-in's planning views are the primary interface for manual S&OP adjustments (e.g., editing Consensus Demand), per SAP IBP's documentation.
* Option D: Using Driver-Based PlanningThis is incorrect. Driver-Based Planning is a methodology (e.
g., linking demand to drivers), not a direct manual adjustment method.
Thus, A and C are valid ways, per SAP IBP's official planning interfaces.

NEW QUESTION # 39
Which of these conditions must be met to create a Local Member key figure? Note: There are 2 correct answers to this question.

• A. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel
• B. Use Excel Cell reference in the Report Editor option is selected
• C. Activate Local Member recognition setting is selected
• D. Users should have authorization for template administration

Answer: C,D

Explanation:
Local Members in SAP IBP's Excel add-in are user-defined calculations (e.g., summing two key figures) within a planning view, not stored in the system.
* Option A: Use Excel Cell reference in the Report Editor option is selectedThis is incorrect. Cell references are used in local member formulas, but this isn't a prerequisite setting; it's an action during creation.
* Option B: Users should have authorization for template administrationThis is correct. Creating Local Members requires permissions tied to template administration (e.g., via a business role), ensuring control over UI modifications, per SAP IBP's security model.
* Option C: Activate Local Member recognition setting is selectedThis is correct. The "Local Member Recognition" setting must be enabled in the Excel add-in options to allow Local Members to be created and recognized, per SAP IBP's Excel documentation.
* Option D: A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft ExcelThis is incorrect. Selecting a key figure is part of building a view, not a specific condition for Local Members.
Thus, B and C are prerequisites for Local Members, per SAP IBP's Excel UI guidelines.

NEW QUESTION # 40
What are some of the actions configurators can do when working with versions? Note: There are 2 correct answers to this question.

• A. Delete key figure data for a date range for all versions at once
• B. Run an application job to purge obsolete versions
• C. Copy key figure data from any version to any version
• D. Copy master data from base version to other version

Answer: C,D

Explanation:
Versions in SAP IBP (e.g., baseline, scenario) allow what-if planning, with configurators managing data across them, per SAP IBP's version management documentation.
* Option A: Delete key figure data for a date range for all versions at onceThis is incorrect. Purge jobs delete data per version, not across all versions simultaneously in one action.
* Option B: Copy key figure data from any version to any versionThis is correct. The Copy Operator can transfer key figure data between any versions (e.g., baseline to scenario), a standard feature, per SAP IBP's documentation.
* Option C: Copy master data from base version to other versionThis is correct. Master data can be copied from the base version to other versions via the Manage Versions app or data integration, per SAP IBP's version setup.
* Option D: Run an application job to purge obsolete versionsThis is incorrect. Versions are managed manually or via expiration, but there's no specific job to "purge obsolete versions"; data purging is separate.
Thus, B and C are valid actions, per SAP IBP's official version capabilities.

NEW QUESTION # 41
How many different time levels can be selected within one planning view?

• A. All time levels available in the time profile, restricted by global configuration parameter
• B. All time levels available in the time profile
• C. The number of time levels is restricted to four to avoid negative effects on performance
• D. Only time levels from the base planning level of selected key figures

Answer: A

Explanation:
In SAP IBP, a planning view (typically created via the Excel add-in) allows planners to visualize and edit data across various time levels defined in the time profile assigned to the planning area. A time profile in SAP IBP consists of multiple hierarchical levels (e.g., day, week, month, quarter, year). The flexibility to select time levels in a planning view is a core feature of SAP IBP's time-series planning capabilities.
Option A ("Only time levels from the base planning level of selected key figures") is incorrect because planning views are not strictly limited to the base planning level of key figures. The base planning level defines where data is stored, but users can aggregate or disaggregate data across other time levels in the view.
Option C ("All time levels available in the time profile") suggests unrestricted access to all levels, which is partially true but misses a critical nuance. SAP IBP allows flexibility in displaying time levels, but this is governed by system configuration.
Option D ("The number of time levels is restricted to four") is a fabricated limitation not supported by SAP IBP documentation. There's no hardcoded limit of four time levels; performance depends on system resources and configuration, not a fixed cap.
Option B ("All time levels available in the time profile, restricted by global configuration parameter") is correct. SAP IBP allows users to select any time level from the time profile (e.g., day, week, month) in a planning view, but this is subject to a global configuration parameter, such as the "Planning Horizon" or
"Time Profile Level Restrictions," set in the planning area configuration. For example, the "Maximum Number of Time Levels" or similar settings can limit the granularity or range displayed to optimize performance. This aligns with SAP IBP's design to balance flexibility and system efficiency, as outlined in SAP's official documentation on planning views and time profiles.

NEW QUESTION # 42
You need to work in two separate sessions for two different SAP IBP tenants. What can help you differentiate the appearance of their user interfaces? Note: There are 2 correct answers to this question.

• A. Set a separate theme for the Home page in the Web UI
• B. Have a different set of tiles in the Home group of apps
• C. Define a different default planning area via the User Preferences
• D. Add the system name and tenant information from the About section to the Home pages

Answer: A,B

Explanation:
SAP IBP supports multiple tenants (e.g., development, test, production), and users may need to distinguish between them when working in parallel sessions, typically via the Fiori-based Web UI. Customization of the UI is a key feature to enhance usability.
* Option A: Define a different default planning area via the User PreferencesThis is incorrect. While users can set a default planning area in their preferences, this affects functionality (e.g., which planning area loads first), not the visual appearance of the UI. It doesn't help differentiate tenants visually.
* Option B: Have a different set of tiles in the Home group of appsThis is correct. In the SAP IBP Fiori launchpad, the Home page displays app tiles (e.g., Planner Workspaces, Manage Analytics Stories). Administrators or users with appropriate roles can customize the tile layout per tenant, creating distinct sets of tiles. This visual difference helps users identify which tenant they're in, as per SAP IBP' s Fiori UI customization options.
* Option C: Set a separate theme for the Home page in the Web UIThis is correct. SAP Fiori supports theming (e.g., colors, logos) via the UI Theme Designer or tenant-specific settings. By applying a unique theme to each tenant's Web UI, users can visually distinguish them. This is a standard SAP capability leveraged in IBP to enhance user experience.
* Option D: Add the system name and tenant information from the About section to the Home pagesThis is incorrect. The "About" section provides system details (e.g., tenant ID), but there's no standard feature to dynamically display this on the Home page as a customizable UI element. Manual workarounds (e.g., custom tiles) are possible but not a native option.
Thus, B and C are practical, supported methods to differentiate tenant UIs in SAP IBP's Webinterface.

NEW QUESTION # 43
Which of the following are features of lag-based snapshots? Note: There are 2 correct answers to this question.

• A. Target key figures for these snapshots are exposed to the user in planning view
• B. Lag-based snapshots are created in the Configuration app for a fixed time range
• C. Target key figures for these snapshots must have lag as a root attribute in the base planning level
• D. The number of lag-based snapshots are limited to nine levels

Answer: A,C

Explanation:
Lag-based snapshots in SAP IBP capture historical key figure values with a specified time offset (lag), useful for tracking past data (e.g., demand from 3 weeks ago). Their configuration and behavior are defined in SAP IBP's time-series planning framework.
* Option A: The number of lag-based snapshots are limited to nine levelsThis is incorrect. There's no documented limit of nine snapshots in SAP IBP; the number depends on configuration and performance, not a fixed cap.
* Option B: Lag-based snapshots are created in the Configuration app for a fixed time rangeThis is incorrect. Snapshots are configured in the Planning Areas app (via key figure settings), not a generic
"Configuration app," and they dynamically adjust based on lag, not afixed range.
* Option C: Target key figures for these snapshots are exposed to the user in planning viewThis is correct. Lag-based snapshot key figures (e.g., SNAPSHOT_LAG1) are visible and usable in planning views (e.g., Excel), allowing users to analyze historical data, per SAP IBP's documentation.
* Option D: Target key figures for these snapshots must have lag as a root attribute in the base planning levelThis is correct. The lag attribute (e.g., LAG = 1, 2) must be part of the base planning level (e.g., PERPRODLOCLAG) to store snapshot values distinctly, a requirement in SAP IBP's snapshot setup, per official guides.
Thus, C and D are features of lag-based snapshots, per SAP IBP's official functionality.

NEW QUESTION # 44
Which SAP IBP planning operator can be run to delete planning objects in a certain version?

• A. Purge Key Figure Data
• B. Purge Master Data
• C. Purge Key Figure Data Outside Planning Area Planning Horizon
• D. Purge Non-Conforming Data

Answer: A

Explanation:
Planning operators in SAP IBP (via the Application Jobs app) manage data, including deletions. The question likely intends "delete key figure data for planning objects" in a version, not the objects themselves, per SAP IBP's terminology.
* Option A: Purge Master DataThis is incorrect. This deletes master data (e.g., Products), not key figure data tied to planning objects in a version.
* Option B: Purge Key Figure Data Outside Planning Area Planning HorizonThis is incorrect. This deletes data outside the horizon across versions, not specific to a version's planning objects.
* Option C: Purge Key Figure DataThis is correct. The Purge Key Figure Data operator deletes key figure values for specified planning objects (e.g., by filter) in a selected version, per SAP IBP's data management documentation.
* Option D: Purge Non-Conforming DataThis is incorrect. This removes inconsistent data (e.g., orphaned records), not targeted deletion in a version.
Thus, C is the correct operator, per SAP IBP's official job capabilities.

NEW QUESTION # 45
......

Prepare With Top Rated High-quality C-IBP-2502 Dumps For Success in Exam: https://www.vcedumps.com/C-IBP-2502-examcollection.html

Get Totally Free Updates on C-IBP-2502 Dumps PDF Questions: https://drive.google.com/open?id=1k1aeBG2wRhFLKdR6Kv01892aGQVfIdOJ