Guide (New 2024) Actual EMC D-AV-DY-23 Exam Questions
D-AV-DY-23 Exam Dumps Pass with Updated 2024 Certified Exam Questions
NEW QUESTION # 13
Which file contains the live configuration for the MCS process?
- A. /usr/local/avamar/var/lib/server_data/prefs/mcserver.xml
- B. /usr/local/avamar/var/mcserver.xml
- C. /usr/local/avamar/var/mc/server_data/prefs/mcserver.xml
- D. /usr/local/avamar/lib/mcserver.xml
Answer: C
NEW QUESTION # 14
A backup administrator has created a backup group to run daily, the next day the backup did not start on the scheduled time.
What is a cause for this issue?
- A. Group is configured with multiple schedules
- B. Group is scheduled to run outside the backup window
- C. Group is not in the same domain as its clients
- D. Group is disabled
Answer: D
NEW QUESTION # 15
An Avamar administrator wants to run commands that require authentication with all nodes in a multi-node Dell EMC Avamar server.
What should be done to avoid entering the password for each node?
- A. Update the mcserver.xml file on the utility node to allow authentication on all nodes
- B. Load the SSH keys on the utility and storage node
- C. Update the mcserver.xml file on the utility node to allow authentication on all nodes
- D. Load the SSH keys on the utility node
Answer: D
NEW QUESTION # 16
A system administrator is setting up a dataset to perform a full system backup.
What plug-in is used to create a disaster recovery backup on a Windows client?
- A. Windows VSS
- B. Windows VM Image
- C. Windows File System
- D. Windows Application Intelligence
Answer: A
NEW QUESTION # 17
In which format will a Windows file be restored when using the EMC Avamar client Web interface?
- A. tagged
- B. zip
- C. uncompressed
- D. RAR
Answer: B
NEW QUESTION # 18
Which EMC Avamar utility is used to configure a multinode server within a NAT environment?
- A. avmaint
- B. netconfig
- C. dpnnetutil
- D. ifconfig
Answer: C
NEW QUESTION # 19
When fully configured and enabled in its default configuration, how frequently does the EMC Avamar Email Home feature send information to EMC?
- A. Twice a day
- B. Once an hour
- C. Twice an hour
- D. Once a day
Answer: A
NEW QUESTION # 20
A Dell EMC Avamar server in a data center is unable to perform an orderly shutdown.
What is required to bring the Avamar server into a reliable state?
- A. Nothing is required, the Avamar server will automatically perform a system rollback
- B. A system rollback to the most recent checkpoint. Only system generated HFS check validated checkpoints may be used for this task
- C. A system rollback to the most recent checkpoint. An HFS check validation of the checkpoint is optional
- D. A system rollback, using either an Avamar Administrator or system generated HFS check validated checkpoint
Answer: D
NEW QUESTION # 21
Which is the last step in the hardware installation portion of an EMC Avamar multinode deployment?
- A. Placing nodes in the rack
- B. Cabling the nodes to the switch
- C. Connecting to the customer network
- D. Powering on the nodes
Answer: C
NEW QUESTION # 22
What statement describes basic replication for a single Avamar node?
- A. Replication needs dedicated networks on source and target systems.
- B. Replication is one-way communication to a multi-node target system only.
- C. Replication is done through dedicated network to either a multi-node or single target node by default.
- D. Replication is done over the same network to either a multi-node or single target pair.
Answer: D
NEW QUESTION # 23
What is used to store and find data objects in EMC Avamar?
- A. Chunks
- B. Files
- C. Blocks
- D. Hashes
Answer: D
NEW QUESTION # 24
An administrator notices rapidly decreasing capacity storage utilization on a Dell EMC Avamar M1200 multi-node server. Recently, two nodes were added making a total of eight storage nodes.
What is a cause for this decreased capacity storage utilization?
- A. Amount of primary data being packed up and backup retention
- B. Amount of clients created and notes managed is high
- C. Amount and capacities of each hard drive in use per node is low
- D. Avamar server is managing too many nodes at once
Answer: B
NEW QUESTION # 25
A company with an existing Avamar ADS 1x8 node configuration requests a capacity upgrade. The node addition procedure requires increasing the number of checkpoints and Hash File System checks.
What is the recommended syntax to change the number of retained, validated checkpoints to avoid roll- off of any existing good checkpoints, and how many checkpoints and hash file system checks are recommended?
- A. avmaint config --ava cprecent=10 avmaint config --ava cphfscheck=5
- B. avmaint config --ava cprecent=8 avmaint config --ava cphfscheck=4
- C. avmaint config --ava cpmostrecent=8 avmaint config --ava cphfschecked=4
- D. avmaint config --ava cpmostrecent=10 avmaint config --ava cphfschecked=5
Answer: D
NEW QUESTION # 26
When attaching directly to the management port of an EMC Avamar Data Store, which is the recommended IP address to assign to your laptop?
- A. 10.99.99.5
- B. 10.10.99.99
- C. 10.10.99.5
- D. 10.99.99.99
Answer: D
NEW QUESTION # 27
The average daily data added to an AVE is less than 4 GB per day in a file server-only environment and less than 10 GB in a mixed environment.
What is the minimum EMC AVE environment that can support these requirements?
- A. 0.5 TB
- B. 2.0 TB
- C. 1.0 TB
- D. 3.3 TB
Answer: C
NEW QUESTION # 28
Refer to the following abbreviations:
CP: checkpoint
GC: garbage collection
HFS Check: checkpoint validated
By default, what is the Avamar schedule sequence for a maintenance activity?
- A. CP > GC > HFS Check > CP
- B. CP > HFS Check > GC > CP
- C. GC > CP > HFS Check > CP
- D. CP > HFS Check > CP > GC
Answer: C
NEW QUESTION # 29
Which of the following is a supported license capacity for Avamar Virtual Edition (AVE)?
- A. 20TB
- B. 16TB
- C. 10TB
- D. 24TB
Answer: B
NEW QUESTION # 30
What are two available capacities for a Single Node Avamar Data Store Gen4T?
(Select 2)
- A. 1.0 TB
- B. 7.8 TB
- C. 3.9 TB
- D. 8.0 TB
Answer: B,C
NEW QUESTION # 31
Which command is used to configure the power button to reset a Gen4T node if it is pressed for less than 10 seconds?
- A. ipmitool raw 0x30 0x82 0x01 0x01 0x04 0x04
- B. ipmitool power set reset button 10
- C. ipmitool power set reset 10
- D. ipmitool raw 0x30 0x2e 0x01
Answer: A
NEW QUESTION # 32
By default, where are the cache files located on an EMC Avamar Windows backup client?
- A. C:\Program Files\avs\administrator
- B. C:\Program Files\avs\bin
- C. C:\Program Files\avs\var
- D. C:\Program Files\avs\var\clientlogs
Answer: C
NEW QUESTION # 33
Which hash represents each data chunk processed during an EMC Avamar backup?
- A. atomic
- B. file metadata
- C. root
- D. composite
Answer: A
NEW QUESTION # 34
......
Pass Guaranteed Quiz 2024 Realistic Verified Free EMC: https://www.vcedumps.com/D-AV-DY-23-examcollection.html
D-AV-DY-23 Exam Questions - Real & Updated Questions PDF: https://drive.google.com/open?id=1wTrG4j4ba7UKiZ6JDkwjJtzo4LMV1ILD
