[Jan 12, 2022] Get New DES-DD23 Certification – Valid Exam Dumps Questions
100% Passing Guarantee - Brilliant DES-DD23 Exam Questions PDF
EMC DES-DD23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 24
What is a requirement to configure the PowerProtect DD tape out to cloud feature?
- A. Two cloud units
- B. DDVE in the Cloud
- C. Tape Out to Cloud License
- D. Cloud Tier Capacity License
Answer: D
Explanation:
DD VTL supports storing the VTL vault on Cloud Tier storage. To use this functionality, the protection system must be a supported Cloud Tier configuration, and have a Cloud Tier license in addition to the VTL license.
NEW QUESTION 25
Refer to the exhibit.
Match each action to its call-out location.
Answer:
Explanation:
NEW QUESTION 26
A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack. When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?
- A. Expansion port of the controller
- B. Expansion port of the upstream shelf
- C. Host port of the controller
- D. Host port of the downstream shelf
Answer: B
NEW QUESTION 27
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?
- A. SSL
- B. HTTPS
- C. FTP
- D. SSH
Answer: B
NEW QUESTION 28
What rule must be followed during an upgrade procedure with the FS25 expansion shelf?
- A. If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five
- B. FS25 shelf must be on the same chain with DS60
- C. For high performance, the connections from a controller to FS25 shelves must be over FC cables
- D. FS25 shelf is cabled on a separate private chain
Answer: D
Explanation:
Reference: https://www.dell.com/support/kbdoc/en-pk/000082030/71624-memory-requirements-Product Questions: Version: and-storage
https://www.dell.com/support/kbdoc/en-pk/000082030/71624-memory-requirements-Product Questions: Version: and-storage- configurations
NEW QUESTION 29
Which enterprise applications does the DDBEA agent support?
- A. SAP with Oracle, IBM DB2, and Microsoft active directory
- B. Microsoft SQL, Sharepoint, and Exchange servers
- C. IBM DB2, Microsoft SQL, and SAP HANA
- D. Oracle, Microsoft Sharepoint, and Microsoft SQL
Answer: C
NEW QUESTION 30
A customer needs an upgrade on their DD6900 to use HA.
Which expansion shelf is required?
- A. ES25
- B. DS60
- C. ES40
- D. FS25
Answer: C
NEW QUESTION 31
A PowerProtect DD appliance has been installed at a company's location for several months and has reached a steady state.
As a best practice, at what percentage of disk utilization should action be taken?
- A. 80%
- B. 95%
- C. 70%
- D. 60%
Answer: A
NEW QUESTION 32
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 33
What is the order of steps to configure DD Boost on the backup host?
Answer:
Explanation:
NEW QUESTION 34
A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained. Which PowerProtect DD systems meet the customer's requirement?
- A. DD6900, DDVE, and DD9400
- B. DD3300, DD6900, and DD9400
- C. DD9400, DDVE, and DD9900
- D. DDVE, DD3300, and DD6900
Answer: B
NEW QUESTION 35
When the PowerProtect DD system boots up for the first time, the CLI configuration wizard script does not start automatically.
Which command can be used to start the script manually?
- A. configure terminal
- B. setup config
- C. config wizard
- D. config setup
Answer: D
NEW QUESTION 36
An engineer is configuring a PowerProtect DD system for VTL using Fibre Channel. How should the zones be configured?
- A. Hard zones
- B. Single initiator, single target
- C. Single initiator, multi target
- D. Soft zones
Answer: C
NEW QUESTION 37
What can be used to monitor system utilization?
- A. Alert Messages
- B. Health tab in the System Manager GUI
- C. system show performance command
- D. system status command
Answer: A
NEW QUESTION 38
Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?
- A. CIFS
- B. DD Boost
- C. VTL
- D. DDOS
Answer: D
NEW QUESTION 39
A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.
What is causing these drives to be inaccessible?
- A. A second SAS connection from DD9400 to DS60 is not activated.
- B. The capacity license applied is only for 30 drives.
- C. There are not enough spare drives.
- D. There are not enough cache drives on the DD9400 to support the extra capacity.
Answer: A
NEW QUESTION 40
What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?
Answer:
Explanation:
NEW QUESTION 41
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
- A. yes and nfs_rfc1323=1
- B. yes and nfs_rfc1323=0
- C. no and nfs_rfc1323=1
- D. no and nfs_rfc1323=0
Answer: A
NEW QUESTION 42
What are the steps to configure the Retention Lock Compliance?
Answer:
Explanation:
Reference:
https://datastorageasean.com/sites/default/files/EMC-data-domain-retention-lock-wp.pdf
NEW QUESTION 43
Which PowerProtect DD procedure uses the DoD/NIST standards to provide data security?
- A. Replication Encryption
- B. Encryption
- C. End-to-End Verification
- D. Data Sanitization
Answer: D
NEW QUESTION 44
What are some possible network bottlenecks for a PowerProtect DD?
- A. Connectivity, firewalls, and routing protocols
- B. Connectivity, routing protocols, and configuration
- C. Routing protocols, switches and routers, and wire speeds
- D. Configuration, wire speeds, switches and routers
Answer: B
NEW QUESTION 45
An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves.
What consideration should be made when cabling the hardware?
- A. The FS25 shelf should be cabled on a separate chain
- B. The DS60 shelf should be cabled on a separate chain
- C. The DS60 shelf must be populated with identical drives
- D. The FS25 shelf must be fully populated
Answer: C
NEW QUESTION 46
......
Free DES-DD23 braindumps download: https://www.vcedumps.com/DES-DD23-examcollection.html
DES-DD23 Dumps 2022 - NewEMC Exam Questions: https://drive.google.com/open?id=1SkPMoVgh4AWXohp062LPZXYopFm71jID
