[Jul-2023] JN0-363 Exam Dumps Pass with Updated 2023 Service Provider Routing and Switching, Specialist (JNCIS-SP) [Q71-Q89]

Share

[Jul-2023] JN0-363 Exam Dumps Pass with Updated 2023 Service Provider Routing and Switching, Specialist (JNCIS-SP)

Free JN0-363 Exam Dumps to Pass Exam Easily


Juniper JN0-363 certification is an ideal way to verify you have a current knowledge of Service Provider Routing and Switching and how to apply it on Juniper Networks. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam provides an excellent way for networking professionals to demonstrate their knowledge, skills, and experience in the field. Obtaining the Juniper JN0-363 certification can give candidates an edge in the competitive job market and help advance their careers.

 

NEW QUESTION # 71
Which three statements are true about BGP? (Choose three)

  • A. eBGP peering adds value in small networks with multiple upstream connections
  • B. eBGP peering adds value in large enterprise environments with multiple upstream connections
  • C. iBGP peering adds value in small networks with a single upstream connection
  • D. iBGP peering adds value in large enterprise environments with multiple upstream connections
  • E. iBGP peering adds value in small networks with multiple upstream connections

Answer: A,B,D


NEW QUESTION # 72
Which LSA type does an OSPF ABR use to advertise external routes generated by an NSSAASBR into the backbone?

  • A. Type 7
  • B. Type 1
  • C. Type 5
  • D. Type 3

Answer: D


NEW QUESTION # 73
Click the Exhibit button.

Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
Which two statements are true in this scenario? (Choose two.)

  • A. Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
  • B. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
  • C. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
  • D. Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop

Answer: C,D


NEW QUESTION # 74
Click the Exhibit.

Referring to the configuration shown in the exhibit, which statement is true?

  • A. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.
  • B. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.
  • C. Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.
  • D. Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3

Answer: A


NEW QUESTION # 75
Click the Exhibit button.

Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)

  • A. to reduce the risk of forwarding traffic through a stateless tunnel
  • B. to mark the tunnel down after the hold-time expires
  • C. to mark the tunnel up after the hold-time expires
  • D. to remove the tunnel interface from inet.0 after the hold-time expires

Answer: A,B


NEW QUESTION # 76
What Is a key differentiators of generate routes from aggregate routes?

  • A. Generate routes have a default preference value of 210.
  • B. Generate routes use a forwarding next hop.
  • C. Generate routes cannot be used as a gateway of last resort.
  • D. Generate routes have a default next-hop value of reject.

Answer: A


NEW QUESTION # 77
Click the Exhibit button.

You are asked to configure OSPF for the network?
Referring to the exhibit, how should Area 1 be configured?

  • A. totally stubby area
  • B. stub area
  • C. backbone area
  • D. not-so-stubby area

Answer: B

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html


NEW QUESTION # 78
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?

  • A. 192.168.1.3
  • B. 172.18.1.0/24
  • C. 192.108.1.4
  • D. 172.26.4.0730

Answer: D


NEW QUESTION # 79
Which statement is true when using VLANs in a bridge domain on an MX Series device?

  • A. The VLAN tags of the received packet are always translated.
  • B. The VLAN tag of the received packet must match the VLAN tags associated with one of the logical interfaces.
  • C. Only outer VLAN tags can be normalized.
  • D. Outer and inner VLAN tags always checked at egress.

Answer: B


NEW QUESTION # 80
Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

  • A. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
  • B. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
  • C. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
  • D. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present

Answer: A,D


NEW QUESTION # 81
In which situation would you disable penultimate-hop popping?

  • A. When you want to enforce the same class-of-service behavior through the entire LSP
  • B. When you want to ensure the penultimate router can perform the destination route lookup
  • C. When you want to utilize a penultimate router that supports IPv6 tunneling
  • D. When you want to bypass a penultimate router that does not support IPv6 tunneling

Answer: A


NEW QUESTION # 82
Exhibit

You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)

  • A. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.
  • B. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.
  • C. Apply the routing policy on R1 as an export policy to the IBGP group.
  • D. Apply the touting policy on R1 as an Import policy to the IBGP group.

Answer: A,B


NEW QUESTION # 83
What is the purpose of STP BPDUs?

  • A. to determine the root-alternate port
  • B. to exchange MAC addresses
  • C. to determine the least cost path
  • D. to determine the root bridge

Answer: C


NEW QUESTION # 84
Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?

  • A. Frames will be counted by filterA only.
  • B. Frames will be counted by filterB only.
  • C. Frames will be counted initially by filterA and then counted by filterB.
  • D. Frames will be counted initially by filterB and then counted by filterA.

Answer: C


NEW QUESTION # 85
Which statement is true about GRE encapsulation?

  • A. The entire frame is encapsulated by GRE.
  • B. Only the IP header is encapsulated by GRE.
  • C. The entire packet is encapsulated by GRE.
  • D. Only the IP payload is encapsulated by GRE.

Answer: B


NEW QUESTION # 86
Click the Exhibit.

By default, at which router will the implicit null (Label3) action take place for LSP shown in the exhibit?

  • A. R3
  • B. R2
  • C. R1
  • D. R4

Answer: A


NEW QUESTION # 87
Click the Exhibit button.

Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?

  • A. 2400 ms
  • B. 900 ms
  • C. 1200 ms
  • D. 1600 ms

Answer: C


NEW QUESTION # 88
Click the Exhibit.

Referring to the exhibit, what is the result of applying this policy?

  • A. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
  • B. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
  • C. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
  • D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.

Answer: A


NEW QUESTION # 89
......


Juniper JN0-363 certification exam is a prestigious certification that is designed for professionals in the networking industry. It is specifically designed to test the skills and knowledge required to operate and troubleshoot Juniper Networks’ core routing and switching platforms on Service Provider networks. JN0-363 exam is open to engineers, networking professionals, and support staff who want to enhance their skills in network routing and switching technology.

 

JN0-363 Exam Dumps, JN0-363 Practice Test Questions: https://www.vcedumps.com/JN0-363-examcollection.html

Free JN0-363 Study Guides Exam Questions and Answer: https://drive.google.com/open?id=1OpsA1WEaVReNUeXjxD58WNa4wu7HIcUz