New CheckPoint 156-215.81 Dumps & Questions Updated on 2025
Dumps to Pass your 156-215.81 Exam with 100% Real Questions and Answers
CheckPoint 156-215.81 exam is based on Check Point R81, which is the latest version of the Check Point Security Management software. 156-215.81 exam includes multiple-choice questions, which are designed to evaluate the candidate's knowledge and skills in various areas of Check Point Security Administration. 156-215.81 exam also includes hands-on lab exercises that simulate real-world scenarios, which require the candidate to configure and manage security policies using Check Point technologies.
CheckPoint 156-215.81 exam covers a wide range of topics, including network security concepts, Check Point technology overview, configuring security policies, managing user access, and monitoring and troubleshooting network traffic. 156-215.81 exam also tests the candidate's ability to configure and manage Check Point Security Gateway and Management Software Blades systems.
NEW QUESTION # 230
Which of the following statements about Site-to-Site VPN Domain-based is NOT true?
* Route-based- The Security Gateways will have a Virtual Tunnel Interface (VTI) for each VPN Tunnel with a peer VPN Gateway. The Routing Table can have routes to forward traffic to these VTls. Any traffic routed through a VTI is automatically identified as VPN Traffic and is passed through the VPN Tunnel associated with the VTI.
- A. Domain-based- VPN domains are pre-defined for all VPN Gateways. A VPN domain is a host or network that can send or receive VPN traffic through a VPN Gateway.
- B. Domain-based- VPN domains are pre-defined for all VPN Gateways. A VPN domain is a service or user that can send or receive VPN traffic through a VPN Gateway.
- C. Domain-based- VPN domains are pre-defined for all VPN Gateways. When the Security Gateway encounters traffic originating from one VPN Domain with the destination to a VPN Domain of another VPN Gateway, that traffic is identified as VPN traffic and is sent through the VPN Tunnel between the two Gateways.
Answer: A
Explanation:
Domain-based- VPN domains are pre-defined for all VPN Gateways. A VPN domain is a service or user that can send or receive VPN traffic through a VPN Gateway.
This statement is not true because a VPN domain is not a service or user, but a host or network that can send or receive VPN traffic through a VPN Gateway1. This is the definition given in the Site to Site VPN R81 Administration Guide1. The other statements are true according to the same guide1.
* Remote Access VPN R81.20 Administration Guide
* Site to Site VPN R81 Administration Guide
* DeepDive Webinar - R81.20 Seamless VPN Connection to Public Cloud
NEW QUESTION # 231
Bob and Joe both have Administrator Roles on their Gaia Platform. Bob logs in on the WebUI and then Joe logs in through CLI. Choose what BEST describes the following scenario, where Bob and Joe are both logged in:
- A. If Joe tries to make changes, he won't, database will be locked.
- B. Bob will be prompt that Joe logged in.
- C. When Joe logs in, Bob will be log out automatically.
- D. Since they both are log in on different interfaces, they both will be able to make changes.
Answer: A
NEW QUESTION # 232
True or False: The destination server for Security Gateway logs depends on a Security Management Server configuration.
- A. True, all Security Gateways forward logs automatically to the Security Management Server
- B. False, log servers are enabled on the Security Gateway General Properties
- C. True, all Security Gateways will only forward logs with a SmartCenter Server configuration
- D. False, log servers are configured on the Log Server General Properties
Answer: C
NEW QUESTION # 233
Which is NOT an encryption algorithm that can be used in an IPSEC Security Association (Phase 2)?
- A. AES-CBC-256
- B. AES-GCM-256
- C. AES-GCM-128
Answer: A
Explanation:
The answer is B because AES-CBC-256 is not a supported encryption algorithm for IPsec Security Associations (Phase 2) in R81. The supported encryption algorithms are AES-GCM-128, AES-GCM-256, AES-CBC-128, 3DES, and NULL3 References: Check Point R81 VPN Administration Guide
NEW QUESTION # 234
What is the purpose of the Clean-up Rule?
- A. To clean up policies found inconsistent with the compliance blade reports
- B. To log all traffic that is not explicitly allowed or denied in the Rule Base
- C. To remove all rules that could have a conflict with other rules in the database
- D. To eliminate duplicate log entries in the Security Gateway
Answer: B
Explanation:
The purpose of the Clean-up Rule is to log all traffic that is not explicitly allowed or denied in the Rule Base78. The Clean-up Rule is the last rule in the rulebase and is used to drop and log explicitly unmatched traffic97. To improve the rulebase performance, noise traffic that is logged in the Clean-up rule should be included in the Noise rule so it is matched and dropped higher up in the rulebase8. The other options are not valid purposes of the Clean-up Rule.
References: Using Intune device cleanup rules, Security policy fundamentals, Support, Support Requests, Training, Documentation, and Knowledge base for Check Point products and services
NEW QUESTION # 235
What technologies are used to deny or permit network traffic?
- A. Packet Filtenng. Stateful Inspection, and Application Layer Firewall
- B. Stateful Inspection. URL/Application Blade, and Threat Prevention
- C. Firewall Blade. URL/Application Blade and IPS
- D. Stateful Inspection. Firewall Blade, and URL'Application Blade
Answer: D
Explanation:
Explanation
The technologies that are used to deny or permit network traffic are Stateful Inspection, Firewall Blade, and URL/Application Blade. Stateful Inspection is a technology that inspects network traffic at the packet level and maintains the state and context of each connection. Firewall Blade is a software blade that enforces security policy and prevents unauthorized access to protected resources. URL/Application Blade is a software blade that enables administrators to control access to millions of websites and applications based on users, groups, and machines.
References: : Check Point R81 Security Gateway Administration Guide, page 9. : Check Point R81 Security Gateway Administration Guide, page 10. : Check Point R81 Security Gateway Administration Guide, page 12.
NEW QUESTION # 236
Please choose correct command syntax to add an "emailserver1" host with IP address 10.50.23.90 using GAiA management CLI?
- A. mgmt add host name ip-address 10.50.23.90
- B. hostname myHost12 ip-address 10.50.23.90
- C. add host name emailserver1 ip-address 10.50.23.90
- D. mgmt add host name emailserver1 ip-address 10.50.23.90
Answer: D
Explanation:
Explanation
The correct syntax for adding a host using GAiA management CLI is mgmt add host name <name> ip-address
<ip-address>2. References: Check Point GAiA R81 Command Line Interface Reference Guide
NEW QUESTION # 237
Fill in the blanks: In _____ NAT, Only the ________ is translated.
- A. Simple; source
- B. Hide; source
- C. Static; source
- D. Hide; destination
Answer: B
Explanation:
Explanation
In Hide NAT, only the source IP address is translated to a different IP address4. This is used to hide a group of hosts behind a single IP address, usually the external interface of the Security Gateway. References: Check Point R81 Firewall Administration Guide
NEW QUESTION # 238
Which option in a firewall rule would only match and allow traffic to VPN gateways for one Community in common?
- A. Specific VPN Communities
- B. Accept all encrypted traffic
- C. All Connections (Clear or Encrypted)
- D. All Site-to-Site VPN Communities
Answer: A
Explanation:
Explanation
Specific VPN Communities is the option that would only match and allow traffic to VPN gateways for one Community in common. This option allows you to define a specific VPN community that includes the VPN gateways that are allowed to communicate with each other. The other options are either too broad or too narrow for this scenario. References: [Site to Site VPN in R80.x - Tutorial for Beginners]
NEW QUESTION # 239
You have successfully backed up your Check Point configurations without the OS information. What command would you use to restore this backup?
- A. migrate import
- B. restore_backup
- C. import backup
- D. cp_merge
Answer: B
NEW QUESTION # 240
Which of these is NOT a feature or benefit of Application Control?
- A. Eliminate unknown and unwanted applications in your network to reduce IT complexity and application risk.
- B. Scans the content of files being downloaded by users in order to make policy decisions.
- C. Identify and control which applications are in your IT environment and which to add to the IT environment.
- D. Automatically identify trusted software that has authorization to run
Answer: B
Explanation:
File scanning is a job for ThreatCloud and it sandboxes/scrubs files.
NEW QUESTION # 241
Stateful Inspection compiles and registers connections where?
- A. State Cache
- B. Connection Cache
- C. State Table
- D. Network Table
Answer: C
Explanation:
Stateful Inspection compiles and registers connections in the State Table. The State Table is a database that stores information about active connections and sessions on the Security Gateway. The other options are not valid names for the database that stores connection information.
References: 1: Policy Types 2: CPUSE 3: SIC : [Software Containers] : [Stateful Inspection]
NEW QUESTION # 242
A stateful inspection firewall works by registering connection data and compiling this information. Where is the information stored?
- A. In State tables.
- B. In the system SMEM memory pool.
- C. In a CSV file on the firewall hard drive located in $FWDIR/conf/.
- D. In the Sessions table.
Answer: A
Explanation:
Explanation
A stateful inspection firewall works by registering connection data and compiling this information in state tables. State tables are data structures that store information about the state and context of each connection, such as source, destination, service, protocol, sequence number, flags, etc. State tables enable the firewall to inspect both the header and the payload of each packet and apply security policies accordingly.References:
[Stateful Inspection], [State Tables]
NEW QUESTION # 243
When a Security Gateways sends its logs to an IP address other than its own, which deployment option is installed?
- A. Distributed
- B. Standalone
- C. Bridge
Answer: A
Explanation:
When a Security Gateway sends its logs to an IP address other than its own, it means that the Security Gateway and the Log Server are installed on different machines. This is a characteristic of a Distributed deployment3. Therefore, the correct answer is A
NEW QUESTION # 244
Packet acceleration (SecureXL) identifies connections by several attributes. Which of the attributes is NOT used for identifying connection?
- A. Source Address
- B. Source Port
- C. TCP Acknowledgment Number
- D. Destination Address
Answer: C
NEW QUESTION # 245
In HTTPS Inspection policy, what actions are available in the "Actions" column of a rule?
- A. "Inspect", "Bypass", "Block"
- B. "Inspect", "Bypass"
- C. "Inspect", "Bypass", "Categorize"
- D. "Detect", "Bypass"
Answer: B
Explanation:
Explanation
The actions available in the "Actions" column of a rule in HTTPS Inspection policy are "Inspect" and
"Bypass". "Inspect" means that the HTTPS traffic will be decrypted and inspected according to the Access Control policy. "Bypass" means that the HTTPS traffic will not be decrypted and will be allowed without inspection1. The other options are not valid actions for HTTPS Inspection policy.
NEW QUESTION # 246
Look at the following screenshot and select the BEST answer.
- A. Clients external to the Security Gateway can upload any files to the FTP_Ext-server using FTP.
- B. Internal clients can upload and download archive-files to FTP_Ext server using FTP.
- C. Clients external to the Security Gateway can download archive files from FTP_Ext server using FTP.
- D. Internal clients can upload and download any-files to FTP_Ext-server using FTP.
Answer: C
NEW QUESTION # 247
In the R81 SmartConsole, on which tab are Permissions and Administrators defined?
- A. Manage and Settings
- B. Logs and Monitor
- C. Security Policies
- D. Gateway and Servers
Answer: A
NEW QUESTION # 248
What is UserCheck?
- A. Communication tool used to notify an administrator when a new user is created
- B. Communication tool used to inform a user about a website or application they are trying to access
- C. Messaging tool user to verify a user's credentials
- D. Administrator tool used to monitor users on their network
Answer: A
Explanation:
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_NextGenSecurityGateway_Guide/Topics-FWG/UserCheck.htm
NEW QUESTION # 249
Why would an administrator see the message below?
- A. A new Policy Package created on both the Management and Gateway will be deleted and must be packed up first before proceeding.
- B. A new Policy Package created on the Gateway and transferred to the management will be overwritten by the Policy Package currently on the Gateway but can be restored from a periodic backup on the Gateway.
- C. A new Policy Package created on the Management is going to be installed to the existing Gateway.
- D. A new Policy Package created on the Gateway is going to be installed on the existing Management.
Answer: C
NEW QUESTION # 250
Your company enforces a strict change control policy. Which of the following would be MOST effective for quickly dropping an attacker's specific active connection?
- A. Block Intruder feature of SmartView Tracker
- B. SAM - Suspicious Activity Rules feature of SmartView Monitor
- C. Change the Rule Base and install the Policy to all Security Gateways
- D. Intrusion Detection System (IDS) Policy install
Answer: A
NEW QUESTION # 251
In what way is Secure Network Distributor (SND) a relevant feature of the Security Gateway?
- A. SND is a feature of fw monitor to capture accelerated packets
- B. SND is a feature to accelerate multiple SSL VPN connections
- C. SND is used to distribute packets among Firewall instances
- D. SND is an alternative to IPSec Main Mode, using only 3 packets
Answer: C
NEW QUESTION # 252
Look at the screenshot below.
What CLISH command provides this output?
- A. show confd configuration all
- B. show configuration all
- C. show configuration
- D. show confd configuration
Answer: C
NEW QUESTION # 253
What are the three deployment options available for a security gateway?
- A. Distributed, Bridge Mode, and Remote
- B. Remote, Standalone, and Distributed
- C. Standalone, Distributed, and Bridge Mode
- D. Bridge Mode, Remote, and Standalone
Answer: C
Explanation:
Explanation
A security gateway is a device that enforces the security policy on the traffic that passes through it. There are three deployment options available for a security gateway: Standalone, Distributed, and Bridge Mode.
Standalone means that the security gateway and the security management server are installed on the same machine. Distributed means that the security gateway and the security management server are installed on separate machines. Bridge Mode means that the security gateway acts as a transparent bridge between two network segments, without changing the IP addressing scheme1. References: Check Point R81 Security Gateway Technical Administration Guide
NEW QUESTION # 254
Security Zones do no work with what type of defined rule?
- A. Application Control rule
- B. IPS bypass rule
- C. Firewall rule
- D. Manual NAT rule
Answer: D
Explanation:
Explanation
Security Zones are a feature of Application Control and Identity Awareness that allow you to define groups of network objects based on their level of trust. Security Zones do not work with Manual NAT rules, because Manual NAT rules are applied before the Application Control and Identity Awareness policy is enforced1.
References: Check Point R81 Security Management Administration Guide
NEW QUESTION # 255
......
CheckPoint 156-215.81 exam covers a wide range of topics related to security administration, including network security, VPNs, firewall policies, and security management. To pass 156-215.81 exam, candidates must demonstrate their ability to configure and manage Check Point Security Gateway and Management Software Blades, as well as troubleshoot common issues related to these systems. Check Point Certified Security Administrator R81 certification is highly valued in the IT industry and can lead to a wide range of career opportunities in security administration.
Updated Exam 156-215.81 Dumps with New Questions: https://www.vcedumps.com/156-215.81-examcollection.html
Today Updated 156-215.81 Exam Dumps Actual Questions: https://drive.google.com/open?id=1NUyhD1OK-20Fq8bjhzBMfiDuJOvc4fuk
