[Nov 24, 2021] Lesson Brilliant PDF for the HPE6-A71 Tests Free Updated Today
Get New 2021 Valid Practice Aruba-ACMP HPE6-A71 Q&A - Testing Engine
For more info read reference:
NEW QUESTION 18
A group of users on the same floor of a campus residence experience connectivity problems continuously throughout the morning. The administrator suspects that it is a L1 problem with physical interference.
What can the administrator do to find the cause of this problem?
- A. Access a controller's spectrum analysis data from AirWave's dashboards, under Home.
- B. Access a controller's spectrum analysis data directly from AirWave with Quick Links.
- C. AccessRAPIDS data from AirWave's dashboards, under Home.
- D. Access RAPIDS data from AirWave's RAPIDS section.
Answer: B
NEW QUESTION 19
Which Aruba Mobility Controller (MC) administrative role should an administrator assign to a receptionist so that they can create and manage guest accounts?
- A. network-operations
- B. guest-provisioning
- C. guest-operator
- D. receptionist
Answer: B
NEW QUESTION 20
Which protocol communicates RF neighborhood information to an Aruba Mobility Master (MM) for use byAirMatch?
- A. GRE
- B. PAPI
- C. AMON
- D. SNMP
Answer: C
NEW QUESTION 21
Where would an administrator define the split-tunneling mode for a RAP located at a branch office?
- A. the AAA policy on the controller
- B. the Firewall policy on the RAP
- C. the Firewall policy on the controller
- D. the VAP profile on the controller
Answer: D
Explanation:
Explanation
References:
the WLAN was created to use the tunnel-forwarding mode. Toconfigure the WLAN to use split-tunnel mode, you must edit the WLAN profile.
NEW QUESTION 22
Refer to the exhibit.
Which controller shown in the exhibit is elected as the cluster leader?
- A. Controller C
- B. Controller D
- C. Controller B
- D. Controller A
Answer: C
NEW QUESTION 23
An administrator wants to use AirWave to manually add devices on the network. Where should the administrator perform this action?
- A. in AMP Setup
- B. in Device Setup
- C. in APs/Devices
- D. inGroups
Answer: B
NEW QUESTION 24
Refer to the exhibit.
An AP is connected to a cluster of controllers. An AAA server provides all authentication and authorization functions for wireless users. A wireless user connects to an AP, and Active User Anchor Controller (A-UAC) and Standby UAC (S-UAC) tunnels are built from the AP to the respective controllers in the cluster.
Why would an administrator create four VRRP groups with four Virtual IP (VIP) addresses in the cluster?
- A. to provide a VRRP group for election of the cluster leader
- B. to allow the AP to establish redundant AP Anchor Controller (AAC) connections to the cluster
- C. to allow the AAA Server to enforce RADIUS CoA in case the A-UAC experiences an outage
- D. to allow High Availability (HA) Fast Failover to function in case a controller experiences an outage
Answer: C
NEW QUESTION 25
What can be determined from the command output shown below?
- A. The synchronized data is protected by VRRP.
- B. The synchronization period is at its default value.
- C. The command was executed on the standby Mobility Master (MM).
- D. The other Mobility Master (MM) is the active license server.
Answer: B
NEW QUESTION 26
An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?
- A. Persistent
- B. Standard
- C. Always
- D. Backup
Answer: D
Explanation:
Explanation
https://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/Remote_AP/Ad
NEW QUESTION 27
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?
- A. From apboot mode, execute factory_reset.
- B. From apboot mode, execute purgeenv.
- C. From the AP's ArubaOS CLI, execute write erase all.
- D. From the controller's ArubaOS, execute write erase all.
Answer: A
NEW QUESTION 28
An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?
- A. Per-user tunneled node
- B. Per-port tunneled node
- C. Split-tunneled mode
- D. VLAN tunneled mode
Answer: B
NEW QUESTION 29
An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode.
The administrator expects AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.
What should the administrator do to solve this problem?
- A. Define AirWave communication parameters for the Virtual Mobility Controllers on the MobilityMaster, and then scan for the Virtual Mobility Controllers in AirWave.
- B. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and have AirWave repoll the Mobility Master.
- C. Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.
- D. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.
Answer: D
NEW QUESTION 30
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?
- A. From apboot mode, execute purgeenv.
- B. From the AP's ArubaOS CLI, execute write erase all.
- C. From the controller's ArubaOS, execute write erase all.
- D. From apboot mode, execute factory_reset.
Answer: A
NEW QUESTION 31
An administrator supports a group of engineersthat commonly troubleshoot company problems from any location without wired connectivity. They need secure connectivity to a corporate web-based portal with their Android smartphones. Which solution should the administrator recommend to solve the engineer's connectivity problem?
- A. Deploy site-to-site VPN
- B. Deploy Mobile Device Management
- C. Deploy Campus APs with mesh
- D. Deploy VIA clients
Answer: A
NEW QUESTION 32
Which two protocols does AirWave use to monitor Aruba Mobility Controllers ()?
- A. PAPI and AMON
- B. SNMP and SSH
- C. SNMP and AMON
- D. PAPI and GRE
Answer: C
NEW QUESTION 33
Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS 8.x?
- A. IAP
- B. Mobility Master
- C. BLE Beacon
- D. RAP
Answer: D
NEW QUESTION 34
Which Aruba AP mode constantly scans the radioenvironment to gather IDS and RF information?
- A. Spectrum AP
- B. RAP
- C. Air Monitor
- D. Mesh Portal
Answer: C
NEW QUESTION 35
An administrator manages an Aruba wireless solution, deployed in a company with locations across the world.
In one country, the local government organization that controls wireless transmissions increases the maximum EIRP allowed for certain channels.
Which component does the administrator need to update on the Mobility Master (MM) to accommodatethis change?
- A. the Controller port configuration
- B. the AP Group configuration
- C. the regulatory-cert file
- D. the AP system profile
Answer: D
NEW QUESTION 36
An administrator needs to support Unified Communications and Collaboration (UCC) in a company's network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications.
Which controller topology meets these requirements?
- A. Mobility Master-Mobility Controller
- B. Master-Local
- C. Standalone Mobility Controller
- D. Zones
Answer: A
NEW QUESTION 37
An administrator purchases a pair of Mobility Masters (MM) and wants to deploy 16 Virtual Mobility Controllers (VMCs). What is the minimum number of clusters that the administrator needs to implement to support the number of VMCs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 38
An administrator deploys an Aruba wireless solution comprised of:
-a pair of Mobility Masters (MMs)
-multiple Mobility Controllers (MCs) and virtual Mobility Controllers (VMCs)
-an AirWave server
-a ClearPass server
The Aruba Mobility solution runs ArubaOS 8.X.
Which component in this environment globally defines anddeploys VLANs for wireless users?
- A. Mobility Master
- B. Mobility Controller or Virtual Mobility Controller
- C. AirWave server
- D. ClearPass server
Answer: B
NEW QUESTION 39
An administrator supports a group of engineers that commonly troubleshoot company problems from any location without wired connectivity. They need secure connectivity to a corporate web-based portal with their Android smartphones. Which solution should the administrator recommend to solve the engineer's connectivity problem?
- A. Deploy VIA clients
- B. Deploy Mobile Device Management
- C. Deploy Campus APs with mesh
- D. Deploy site-to-site VPN
Answer: A
NEW QUESTION 40
An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?
- A. AP names, AP groups, controller names, and controller groups
- B. AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)
- C. AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)
- D. controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)
Answer: C
Explanation:
Explanation/Reference: http://www.arubanetworks.com/techdocs/ArubaOS_81_Web_Help/Content/ArubaFrameStyles/ AirGroup/AirGroup_Features.htm
NEW QUESTION 41
A cluster has two Aruba 7240 Mobility Controllers (MCs) and two Aruba 7220Mobility Controllers (MCs).
How is the cluster leader elected if all controllers have the default priority?
- A. The 7240 controller with the lowest IP address is elected.
- B. The controller with the highest MAC address is elected.
- C. The 7240 controller with the highest MAC address is elected.
- D. The controller with the highest IP address is elected.
Answer: C
NEW QUESTION 42
......
HPE6-A71 Dumps PDF - 100% Passing Guarantee: https://www.vcedumps.com/HPE6-A71-examcollection.html
Latest HPE6-A71 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1cHlDlnih1TWz7fMXGm4FpjL4UQgWDlsv
