HQT-6714 Exam Brain Dumps - Study Notes and Theory [Dec-2025]
100% Guaranteed Results HQT-6714 Unlimited 112 Questions
NEW QUESTION # 65
The 'pairresync' command in Hitachi Universal Replicator permanently stops replication between pairs.
- A. False
- B. True
Answer: A
NEW QUESTION # 66
During the replication process, Hitachi Universal Replicator uses ________ to manage network failures.
- A. Write-throttling
- B. Automatic resynchronization
- C. Manual checkpointing
- D. Delta resync
Answer: D
NEW QUESTION # 67
What is required before configuring Hitachi Ops Center Protector for use with Hitachi Universal Replicator?
- A. Establishing a VPN tunnel between sites
- B. Setting up replication groups and pairs in Ops Center
- C. Installing the Command Control Interface software on all client machines
- D. Defining the network topology in the Ops Center
Answer: C
NEW QUESTION # 68
Which functionality does Hitachi Ops Center Protector provide to recover from a disaster recovery scenario?
- A. Manual intervention to switch to the secondary site
- B. Automated failover to secondary site
- C. Only alerts the administrator to initiate recovery
- D. Instant recovery using cached data
Answer: B
NEW QUESTION # 69
Which feature of Hitachi Universal Replicator ensures that data remains consistent during long-distance replication?
- A. High-speed caching
- B. Inline deduplication
- C. Real-time compression
- D. Write-order fidelity
Answer: D
NEW QUESTION # 70
In Hitachi Ops Center Protector, which of the following is true about the role of "Consistency Groups"?
- A. They organize users into groups based on their access levels.
- B. They provide consistent throughput for all replicated data.
- C. They manage batch processing of replication commands.
- D. They ensure all related volumes are replicated at the same logical point in time.
Answer: D
NEW QUESTION # 71
What are common indicators of a misconfiguration in Hitachi Universal Replicator setup? (Choose Two)
- A. Frequent, unexplained switching between primary and secondary sites
- B. Consistently low CPU usage on both primary and secondary sites
- C. Increased I/O operations on the primary storage
- D. Replication process logs errors repeatedly
Answer: A,D
NEW QUESTION # 72
Which of the following performance considerations is critical when configuring Hitachi Universal Replicator for optimal operation?
- A. Encryption speed
- B. Network bandwidth and latency
- C. CPU utilization on the storage array
- D. Disk I/O operations per second
Answer: B
NEW QUESTION # 73
When troubleshooting Hitachi Universal Replicator, the first log to check for replication failures is the ________ log.
- A. System error
- B. Replication event
- C. Operation management
- D. Journal
Answer: B
NEW QUESTION # 74
In a 3DC setup with Hitachi Universal Replicator, the configuration that uses two synchronous sites and one asynchronous site is known as a ________ configuration.
- A. Multitarget
- B. Cascade
- C. Parallel
- D. Uniform spread
Answer: B
NEW QUESTION # 75
To monitor the replication process, which component must be configured using the Command Control Interface?
- A. horcm files
- B. Journal groups
- C. Primary volumes
- D. Secondary volumes
Answer: B
NEW QUESTION # 76
Hitachi Ops Center Protector does not support manual synchronization of data between primary and secondary sites.
- A. False
- B. True
Answer: A
NEW QUESTION # 77
Which type of 3DC configuration uses two synchronous sites and one asynchronous site?
- A. Uniform spread configuration
- B. Multitarget configuration
- C. Packed configuration
- D. Cascade configuration
Answer: D
NEW QUESTION # 78
What key benefits are associated with using a 3DC configuration in a Hitachi Universal Replicator setup? (Choose two)
- A. Real-time analytics of replication traffic
- B. Reduced need for manual intervention during replication
- C. Enhanced redundancy and disaster recovery
- D. Simplified journal volume management
Answer: B,C
NEW QUESTION # 79
What would be a critical first step when noticing an anomaly in replication data throughput?
- A. Checking the replication logs for errors
- B. Rebooting the primary storage system
- C. Modifying the network configuration settings
- D. Recreating all replication pairs
Answer: A
NEW QUESTION # 80
In what scenario is Hitachi Universal Replicator most beneficial for enterprise data replication?
- A. When all data must be encrypted before replication
- B. When the primary and secondary sites are geographically distant
- C. When data volume is low but requires high availability
- D. When the replication window is small and requires high throughput
Answer: B
NEW QUESTION # 81
The critical component that helps Hitachi Universal Replicator minimize performance impact on primary storage during peak load times is ________.
- A. Network segmentation
- B. System load-based throttling
- C. Snapshot technology
- D. Data deduplication
Answer: B
NEW QUESTION # 82
The process that involves incremental synchronization of only changed data blocks in a 3DC environment is called ________.
- A. Snapshot Sync
- B. Volume Sync
- C. Delta Resync
- D. Mirror Sync
Answer: C
NEW QUESTION # 83
In the context of 3DC operations with Global-Active Device, what is the primary advantage of asynchronous replication to the third site?
- A. It reduces the cost of replication.
- B. It provides higher data availability and disaster recovery.
- C. It increases the performance of the primary site.
- D. It simplifies network configuration.
Answer: B
NEW QUESTION # 84
What aspect of Hitachi Universal Replicator helps ensure data integrity during long-distance replication?
- A. High-speed caching
- B. Inline deduplication
- C. Real-time compression
- D. Write-order fidelity
Answer: D
NEW QUESTION # 85
When configuring a 3DC with Hitachi Universal Replicator, which of the following is an essential consideration for the asynchronous site?
- A. Network bandwidth and stability
- B. Latency requirements
- C. Proximity to the synchronous sites
- D. Physical security of the data center
Answer: A
NEW QUESTION # 86
What is a primary characteristic of Hitachi Universal Replicator?
- A. Asynchronous replication
- B. Deduplication
- C. Local continuous replication
- D. Synchronous replication
Answer: A
NEW QUESTION # 87
Which component in a Hitachi Universal Replicator setup stores a copy of the write operations pending synchronization?
- A. Buffer volume
- B. Secondary volume
- C. Journal volume
- D. Command device
Answer: C
NEW QUESTION # 88
......
HQT-6714 Dumps PDF - Want To Pass HQT-6714 Fast: https://www.vcedumps.com/HQT-6714-examcollection.html
HQT-6714 Practice Exam Dumps Exam: https://drive.google.com/open?id=125dsMTHkP0s4AclugVGHD9IXysH-pKGA
