Real HPE6-A73 are Uploaded by VCEDumps provide 2021 Latest HPE6-A73 Practice Tests Dumps.
All HPE6-A73 Dumps and Aruba Certified Switching Professional Exam Training Courses Help candidates to study and pass the Aruba Certified Switching Professional Exam Exams hassle-free!
NEW QUESTION 31
Refer to the exhibit.
The ACL configuration defined on Core-1 is as follows:
if telnet was being used which device connection would he permitted and functional in both directions? (Select two }
- A. Client 1 to Client 3
- B. Server 1to Client 1
- C. Client 1 to Client 2
- D. Server 2 to Client 2
- E. Client 3 to Client 2
Answer: B,C
NEW QUESTION 32
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and the AOS-CX switches can successfully authenticate users; however, the role information fails to download to the switches. What policy should be added to an intermediate firewall to allow the downloadable role function to succeed?
- A. Allow UDP 1811
- B. Allow TCP 22
- C. Allow UDP 8211
- D. Allow TCP 443
Answer: C
NEW QUESTION 33
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined.A network engineer notices thefollowing command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Implement replay protection for AAA messages
- B. Speed up the AAA authentication process
- C. Define the account to implement downloadable user roles
- D. Define the account to implement change of authorization
Answer: B
NEW QUESTION 34
A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?
- A. Aruba AirWave
- B. NetEdit
- C. Network Analysis Engine (NAE)
- D. Aruba Activate
Answer: B
NEW QUESTION 35
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any web-servers group web-ports
Answer: A
NEW QUESTION 36
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure the engineers PC is synchronized to the same NTP server as the AOS-CX switch
- B. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server.
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Ensure the engineers web browser is configured for the same timezone as the AOS-CX switch
Answer: A
NEW QUESTION 37
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.
Which solution should the company implement?
- A. RADIUS dynamic authorization
- B. Downloadable user roles
- C. IPSec
- D. User-based tunneling
Answer: D
NEW QUESTION 38
An administrator is looking for a data center switching solution that will greatly reduce the likelihood of dropped frames when uplink congestion is experienced. Which AOS-CX switch queuing feature meets the administrator's needs?
- A. VOQ
- B. DWWR
- C. FIFO
- D. WFQ
Answer: A
NEW QUESTION 39
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- B. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- C. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: B
NEW QUESTION 40
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
- B. The default next-hop address supersedes the two preceding next-hop addresses.
- C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
- D. The traffic is always dropped if the next-hop addresses are unreachable.
Answer: B
NEW QUESTION 41
Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?
- A. Switch(config }# vlan <VLAN-ID>
Switch(config-vtan-<VLAN*lD>)# voice - B. Switch(config)# vlan <VLAN-ID> voice
- C. Switch(config)# port-access role <role-name>
Switch^config-pa-roieW vlan access <VLAN-ID> - D. Switch(config)# port-access Jidp-group <LLDP-group-name>
Switch(config-Hdp-group)# vlan <VLAN-ID>
Answer: A
NEW QUESTION 42
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?
- A. Supports only port-based tunneling
- B. Uses the same management protocol as Aruba APs
- C. Uses iPSec to protect the management and data traffic
- D. Uses IPSec to protect the management traffic
Answer: B
NEW QUESTION 43
Examine the AOS-CX switch output:
Based on this output, what is correct?
- A. 802 1X authentication occurred and downloadable user rotes are deployed
- B. 802.1X authentication was successful, but MAC authentication is yet to start
- C. Only 802 1X authentication is configured on the port
- D. A local user role was deployed using a ClearPass solution
Answer: A
NEW QUESTION 44
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. LLDP
- B. ARP
- C. ICMP
- D. DHCP
Answer: C
NEW QUESTION 45
Which statement is correct regarding ACLs and TCAM usage?
- A. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
- B. Using object groups consumes the same resources as specific ACE entries.
- C. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
- D. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches.
Answer: C
NEW QUESTION 46
An administrator is replacing the current access switches with AOS-CX switches.The access layer switches must authenticate user and networking devices connecting to them.Some devices support no form of authentication and some support S02 1X Some ports have a VoIP phone and a PC connected to the same port where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. Device mode should be implemented.
- B. The client-limit setting for port access needs to be changed
- C. Device fingerprinting is required for authentication.
- D. 8G2.1X must be configured to work in fallback mode
Answer: B
NEW QUESTION 47
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. User-based tunneling (UBT)
- D. Policy-based routing (PBR)
Answer: C
NEW QUESTION 48
Examine the following AOS-CX switch configuration:
Which access control entries would allow web traffic to the web servers 10.1.0.100 and 10.1.1.100?
- A. permit tcp any 10.1.0.100 0.0.1.0 eq 80
- B. permit tcp any 10.1.0.100/10.1.1.100 eq 80
- C. permit tcp any 10.1.0.100/255.255.254.255 eq 80
- D. permit tcp servers eq 80
Answer: A
NEW QUESTION 49
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Traffic rate limit is configured on queue level
- B. Rate limiting and egress queue shaping can be applied globally
- C. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- D. Limits can be defined only for broadcast and multicast traffic
Answer: A
NEW QUESTION 50
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement route aggregation
- B. Reduce the hello and dead interval timers
- C. Implement graceful restart
- D. Implement bidirectional forwarding detection (BFD)
Answer: A
NEW QUESTION 51
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Define the server group cppm
- B. Create and assign a local user role to the ports
- C. Enable change of authorization (CoA)
- D. Set the ports to client-mode
Answer: C
NEW QUESTION 52
......
Valid Way To Pass HP's HPE6-A73 Exam with : https://www.vcedumps.com/HPE6-A73-examcollection.html
Free Test Engine For Aruba Certified Switching Professional Exam Certification Exams: https://drive.google.com/open?id=1kUsIdJ5Syt4wt_iN0y8hVUXJqX1oK_hl
