The Most In-Demand HP HPE6-A75 Pass Guaranteed Quiz
New Version HPE6-A75 Certificate & Helpful Exam Dumps is Online
NEW QUESTION # 13
Refer to the exhibit.
Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
Answer: B
NEW QUESTION # 14
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?
- A. User role
- B. 802.1X policy
- C. Firewall policy
- D. AAA policy
Answer: C
NEW QUESTION # 15
Refer to the exhibit.
When configuring a Web Login Page in ClearPass Guest, the information shown is displayed.
What is the Address field value 'securelogin.arubanetworks.com' used for?
- A. for appending to the Web Login URL, before the page name
- B. for ClearPass to send a RADIUS request to the NAD
- C. for the client to POST the user credentials to the NAD
- D. for appending to the Web Login URL, after the page name.
- E. for ClearPass to send a TACACS+ request to the NAD
Answer: C
NEW QUESTION # 16
Refer to the exhibit.
- A. Employee
- B. We can't know this from the screenshot above.
- C. john
- D. mike
Answer: B
NEW QUESTION # 17
Refer to the exhibit.
Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?
- A. Full Access VLAN
- B. Deny Access
- C. Employee VLAN
- D. Internet VLAN
Answer: C
NEW QUESTION # 18
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?
- A. To send a RADIUS CoA message from the ClearPass server to the client
- B. To force the user to re-authenticate and run through the service flow again
- C. To disconnect the user for 30 seconds when they are in an unhealthy posture state
- D. To blacklist the user when they are in an unhealthy posture state
- E. To remediate the client applications and firewall do that updates can be installed
Answer: A
NEW QUESTION # 19
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?
- A. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.
- B. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
- C. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.
- D. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
Answer: C
NEW QUESTION # 20
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster. What must the administrator do to solve this problem?
- A. Add the MultiZone APs to the data zone's CPSec whitelist.
- B. Enable MultiZone booting in the MultiZone AP apboot configuration mode.
- C. Use different AP Group names for the two zones.
- D. Enable CPSec in the MultiZone profile for both the primary and data zone.
Answer: C
NEW QUESTION # 21
A network administrator needs to configure VRRP on VLAN 2 on two AOS-Switches. Which two settings must match on both switches?
- A. the VRID and the virtual IP address
- B. the VRID and priority
- C. the physical IP address and priority
- D. the virtual IP address and the physical IP address
Answer: A
NEW QUESTION # 22
An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?
- A. AP names, AP groups, controller names, and controller groups
- B. AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)
- C. AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)
- D. Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)
Answer: C
NEW QUESTION # 23
What must an OSPF router do when it receives a link state update?
- A. It must run the shortest path first algorithm.
- B. It must participate in a new election for the Designated Router and Backup DR.
- C. It must re-establish adjacency with its Designated Router and Backup DR.
- D. It must initiate a graceful restart timer.
Answer: A
NEW QUESTION # 24
Which solution allows administrators to monitor link status and port utilization on AOS-Switches from a centralized location?
- A. Aruba Mobility Manager
- B. Aruba Mobility Controller
- C. Aruba ClearPass
- D. Aruba AirWave
Answer: D
NEW QUESTION # 25
OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to
10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?
- A. Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.
- B. Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.
- C. Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.
- D. Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.
Answer: A
NEW QUESTION # 26
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?
- A. When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.
- B. When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.
- C. When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.
- D. When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.
- E. When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.
Answer: E
NEW QUESTION # 27
Refer to the exhibit.
Based on the configuration of me create_user form shown, which statement accurately describes the status?
- A. The email field will be visible to guest users when they access the web login page.
- B. The visitor_phone field will be visible to operators creating the account.
- C. The visitor_phone field will be visible to the guest users in the web login page.
- D. The visitor_company field will be visible to operators creating the account.
- E. The visitor_company field will be visible to the guest users when they access the web login page.
Answer: A
NEW QUESTION # 28
A network administrator configures V5F settings on two Aruba 2930F switches. The switches form two separate VSF fabrics. What should the administrator check?
- A. that each switch is assigned a unique VSF priority
- B. that the domain ID matches on both switches
- C. that the switch with the lower priority has the lower member ID
- D. that LLDP MAD is configured on both members
Answer: C
NEW QUESTION # 29
Refer to the exhibit.
A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit. Which issue could cause this output?
- A. The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.
- B. The administrator entered the wrong password for the test account.
- C. The switch does not have a certificate tor port-access installed on the switch.
- D. The RADIUS shared secret does not match on the switch and the server.
Answer: D
NEW QUESTION # 30
Refer to the exhibit.
An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?
- A. Allow CampusA to share from the CampusC pool.
- B. Add 100 more AP licenses to the global pool.
- C. Move 100 licenses from the CampusC pool to the global pool.
- D. Add 100 more AP licenses and assign them to the CampusA pool.
Answer: D
NEW QUESTION # 31
What is the purpose of the captive portal URL hash key on an AOS-Switch?
- A. It encrypts and secures the RADIUS messages that the AOS-Switch sends to ClearPass.
- B. It authenticates guest users based on the password the users enter hi the portal.
- C. It specifies the captive portal URL and conceals the setting in the config.
- D. It does not let users alter the URL that redirects them to the portal.
Answer: D
NEW QUESTION # 32
What are Operator Profiles used for?
- A. to enforce role based access control for Aruba Controllers
- B. to enforce role based access control for ClearPass Policy Manager admin users
- C. to enforce role based access control for ClearPass Guest Admin users
- D. to assign ClearPass roles to guest users
- E. to map AD attributes to admin privilege levels in ClearPass Guest
Answer: C
NEW QUESTION # 33
......
HPE6-A75 Free Certification Exam Material with 72 Q&As : https://www.vcedumps.com/HPE6-A75-examcollection.html
UPDATED HPE6-A75 Exam Questions Certification Test Engine to PDF: https://drive.google.com/open?id=1GOclx2iLIImBo4n-fBvm5Quda20GKNsG
