100% Pass Top-selling NCSC-Level-1 Exams - New 2021 Nutanix Pratice Exam
Nutanix SE Academy Dumps NCSC-Level-1 Exam for Full Questions - Exam Study Guide
NEW QUESTION 39
A consultant deploys a four-node VMware ESXi cluster and vCenter server. An HA/DRS cluster is configured for all four nodes. The customer deploys five new VMs on the cluster.
During the knowledge Transfer, a network cable on one node is removed to demonstrate HA and migration of the VMs to another host. In the HA/DRS cluster settings, the VM Restart Priority for all CVMs is set to Disabled. The customer observes warnings that the CVM on the ejected host is no longer powered on.
Which ESXi HA/DRS cluster setting is missing?
- A. Enable EVC for the cluster.
- B. Disable Automation Level on all CVMs.
- C. Disable VM Monitoring on all CVMs.
- D. Enable Host Monitoring.
Answer: B
NEW QUESTION 40
A customer buys ultimate licensing and wants to use the built-in Nutanix software encryption on their new AHV cluster. The customer needs to create three storage containers and asks the consultant to complete the process as fast as possible.
In which order should the cluster be deployed?
- A. Create Cluster -> Install License Key -> Create Storage Containers -> Encrypt Cluster
- B. Create Cluster -> Create Storage Containers -> Encrypt Cluster -> Install License Key
- C. Create Cluster -> Encrypt Cluster -> Install License Key -> Create Storage Containers
- D. Create Cluster -> Install License Key -> Encrypt Cluster -> Create Storage Containers
Answer: A
NEW QUESTION 41
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A. Through <CVM-IP> :9443
- B. Through <cluster-IP> :8000
- C. Through <cluster-IP> :9443
- D. Through <CVM-IP> :8000
Answer: D
NEW QUESTION 42
After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?
- A. Check the hypervisor version in the Nutanix Compatibility Matrix.
- B. Download the hypervisor ISO again from the vendor website.
- C. Restart the Foundation process and upload the hypervisor again.
- D. Download the latest hypervisor ISO whitelist file from Nutanix portal.
Answer: D
NEW QUESTION 43
A customer is deploying Nutanix AHV clusters over hundreds of remote sites worldwide. Prism Central will be used to centrally manage all clusters. Customer security policy requires the use of MS Active Directory (AD).groups to authenticate all network devices.
Which method should be consultant use to meet the requirements?
- A. Integrate AD authentication on Prism Central Only.
- B. Integrate AD authentication on all Prism Element Clusters.
- C. Proxy Prism Element traffic through Prism Central.
- D. Integrate AD authentication on all CVMs.
Answer: A
NEW QUESTION 44
A consultant is imaging a Nutanix cluster with VMware ESXi. Foundation returns an error that the media is not a supported ISO. The consultant checks the whitelist file in Foundation and confirms that the version of the ISO is not listed.
Which three actions should the consultant take to resolve this issue? (Choose three.)
- A. Restart the imaging process in Foundation.
- B. Obtain the MD5 checksum of the ISO and confirm MD5 checksum of ISO is listed.
- C. Edit the whitelist file in Foundation.
- D. Replace and save whitelist file in Foundation
- E. Download the iso_whitelist.json from the Support portal.
Answer: B,D,E
NEW QUESTION 45
A consultant notices while assigning VLAN tags to hosts and CVMs in a running cluster, that Prism Element displays alerts indicating a node is down.
What should the consultant do to prevent these alerts?
- A. Restart the Nutanix cluster.
- B. Only change the Controller Virtual Machine VLANs.
- C. Stop the Nutanix cluster before changing VLANs.
- D. Only change the hypervisor VLANs.
Answer: C
NEW QUESTION 46
After installation, network ports are properly configured with the default active-backup bonding.
One 10GbE port goes to switch 1. Another 10GbE port goes to switch 2. A consultant tests failover by manually pulling one of the cables and notices it is taking too much time to failover, which is causing excessive packet loss.
What should the consultant enable to resolve this issue?
- A. LACP on switch
- B. PAgP
- C. Jumbo frames
- D. Portfast
Answer: D
NEW QUESTION 47
A customer needs to meet the following requirements for their business critical application:
* SQL Servers must be on specific hosts to lower licensing costs.
* Oracle RAC servers must be on separate hosts for licensing reasons
Which policy or policies should be implemented to meet these requirements?
- A. Configure both VM-Host and VM-VM affinity policy.
- B. Configure VM-VM affinity policy.
- C. Configure VM-VM anti-affinity policy.
- D. Configure VM-Host affinity policy.
Answer: D
NEW QUESTION 48
An existing Nutanix customer has several clusters in production and is adding a new cluster. The customer wants to create an AHV cluster that has already been racked and powered on remotely, with the factory image, using Prism Central.
Which step should the consultant take next?
- A. Build the cluster with the Foundation Applet
- B. Build the cluster with the Foundation VM.
- C. Build the cluster with Foundation Central.
- D. Bare metal image the nodes with the Foundation VM.
Answer: A
NEW QUESTION 49
Where can a consultant find Nutanix Enablement Starter Packs (ESPs)?
- A. In the Services section of the Nutanix website.
- B. In the Support Portal
- C. In the Partner Portal
- D. In the Nutanix .NEXT Community Forum
Answer: C
NEW QUESTION 50
A consultant creates a Windows VM after installing a new Nutanix cluster running AHV. The consultant has statically assigned an IP address to the VM but it is unable to communicate on the network.
Which action should the consultant take to resolve this issue?
- A. Mount and install the Nutanix Guest Tools.
- B. Confirm that IPv6 is enabled on the guest VM.
- C. Confirm that the VM vNIC is tied to the correct VLAN in Prism Element.
- D. Set a Group Policy to make sure the Windows Firewall is disabled.
Answer: C
NEW QUESTION 51
A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)
- A. vShpere DRS
- B. vSphere Power Management
- C. vSphere vMotion
- D. vSphere HA
Answer: A,D
NEW QUESTION 52
A consultant is planning an installation and needs to collect configuration items to be used during the install. The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Project Plan
- B. Questionnaire
- C. Operations Guide
- D. Technical Checklist
Answer: D
NEW QUESTION 53
A consultant is using a customer's switch for installation. Although the 10GbE ports for each of the hosts are connected to the switch, the nodes fail to be discovered.
What is causing the issue?
- A. Foundation VM is running on a Windows host.
- B. IPv6 is not enabled on the switch.
- C. IPMI port is not plugged in.
- D. 10GbE ports are configured with the incorrect duplex setting.
Answer: B
NEW QUESTION 54
A consultant is deploying a Nutanix cluster at a customer location. The consultant will be deploying the latest AOS along with the latest Nutanix hardware.
Which three references should the consultant review prior to this installation? (Choose three.)
- A. Release Notes
- B. End-Of-Life (EOL) Information
- C. Acropolis Advanced Administration Guide
- D. Field & Security Advisories
- E. Software Product Interoperability
Answer: A,D,E
NEW QUESTION 55
A consultant has deployed a new Nutanix AHV cluster with Foundation. The customer requests separating the management and production traffic in the CVM.
Which feature should the consultant configure?
- A. Network Segmentation
- B. Micro-segmentation
- C. Multi-homing
- D. VLAN Tagging
Answer: C
NEW QUESTION 56
What reference materials should be provided to the customer during the Knowledge Transfer?
- A. As-Built Guide, technical slides and checklist, Network Diagram
- B. As-Built Guide, Project Plan, links to documentation and resources
- C. As-Built Guide, technical slides and checklist, links to documentation and resources
- D. Questionnaire, technical slides and checklist, links to documentation and resources
Answer: C
NEW QUESTION 57
A consultant creates an AHV cluster and connects the Intel X550T NICs to the top of rack switch using Twinax cables. The activity and link lights are green. The cluster cannot communicate over the 10GbE link.
What is the first command the consultant should perform to troubleshoot the issue?
- A. manage_ovs show_uplinks
- B. manage_ovs show_interfaces
- C. manage_ovs update_uplinks
- D. manage_ovs show_bridges
Answer: D
NEW QUESTION 58
During a six-node cluster deployment, one node fails to image successfully and Foundation is unable to automatically configure the cluster. The consultant decides to manually complete cluster formation with the successful nodes, then expand the cluster with the remaining unconfigured node.
Which command should be used to begin the process?
- A. cluster create
- B. cluster start
- C. cluster status
- D. cluster expand
Answer: A
NEW QUESTION 59
A customer has engaged a Nutanix consultant to deploy a cluster consisting of two NX-3460-G6 blocks. The consultant arrives at the customer site and fines the following:
* One rack with a total of 5U available
* Two ToR switches with 14 total available ports
* Dual PDUs with six available sockets
What will prevent the consultant from successfully installing the cluster?
- A. Insufficient network ports for communication.
Insufficient sockets for power allocation. - B. Insufficient network ports for communication.
Insufficient sockets for power allocation. - C. Insufficient rack space for block installation.
Insufficient sockets for power allocation. - D. Insufficient sockets for power allocation.
Rack space may not be continuous. - E. Insufficient network ports for communication.
Rack space may not be continuous.
Answer: C
NEW QUESTION 60
A consultant is onsite and needs to start their Foundation Virtual Machine (FVM) to image Nutanix hardware. The FVM fails to boot. The consultant decides to use a different Foundation method.
Assuming the nodes will discover, which Foundation type or configuration option should the consultant select?
- A. Use IPMI MACs
- B. Foundation VM
- C. Use IPMI IPs
- D. Foundation Applet
Answer: D
NEW QUESTION 61
Which two components must be identified to validate that software compatibility requirements are met for Nutanix Cluster Installation? (Choose two.)
- A. Firmware
- B. Hypervisor
- C. AOS
- D. Guest OS
Answer: B,C
NEW QUESTION 62
A consultant configures a Nutanix cluster and integrates the hosts into vCenter using VMware best practices. The customer has requested that the Nutanix cluster only have a single datastore.
Upon configuring the cluster per the customer requirements, vCenter displays an alert regarding the heartbeat datastore. The consultant adds the das.ignoreInsufficientHbDatastore value = true rule. The container can be seen from each host, but the alert remains active.
What should the consultant do to resolve this issue?
- A. Make sure the DRS setting is turned on.
- B. Turn off and then turn back on HA.
- C. Create a second container.
- D. Whitelist the vCenter IP address within Prism.
Answer: B
NEW QUESTION 63
......
Authentic Best resources for NCSC-Level-1 Online Practice Exam: https://www.vcedumps.com/NCSC-Level-1-examcollection.html
