[Jan-2024] Get 100% Real 350-801 Exam Questions, Accurate & Verified VCEDumps Dumps in the Real Exam! [Q204-Q229]

Share

[Jan-2024] Get 100% Real 350-801 Exam Questions, Accurate & Verified VCEDumps Dumps in the Real Exam!

Pass Your CCNP Collaboration Exams Fast. All Top 350-801 Exam Questions Are Covered.


Achieving the Cisco Certified Network Professional (CCNP) Collaboration certification, which includes passing the 350-801 exam, demonstrates a high level of expertise in Cisco collaboration technologies and can help IT professionals advance their careers in the field of collaboration and communication technologies.


For more info about Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

 

NEW QUESTION # 204
Refer to the exhibit.


Refer to the exhibit. A collaboration engineer configures Cisco UCM to act as a DHCP server. What must be done next to configure the DHCP server?

  • A. Restart the TFTP service under Cisco Unified Serviceability.
  • B. Add the new DHCP server to the primary DNS server
  • C. Restart the Cisco DHCP Monitor Service under Cisco Unified Serviceability
  • D. Add a DHCP subnet to the DHCP server under Cisco UCM Administration.

Answer: D


NEW QUESTION # 205
Refer to the exhibit.

A customer submits this output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with a ISDN BRI interface, which BRI changes resolve the issue?
A)

B)

C)

D)

  • A. Option C
  • B. Option A
  • C. Option B
  • D. Option D

Answer: A


NEW QUESTION # 206
An administrator installs a new Cisco TelePresence video endpoint and receives this error:"AOR is not permitted by Allow/Deny list. Which action should be taken to resolve this problem?

  • A. Upload a new policy in VCS.
  • B. Reboot the VCS server and attempt reregistration.
  • C. Correct the restriction policy settings.
  • D. Change the SIP trunk configuration.

Answer: C

Explanation:
The error message "AOR is not permitted by Allow/Deny list" indicates that the endpoint is not allowed to register with the VCS server because it is not on the Allow List or it is on the Deny List. To resolve this problem, you must correct the restriction policy settings.


NEW QUESTION # 207
An engineer must configure a cisco ISR 4000 as an MGCP gateway to download its MGCP- specific configuration from cisco UCM. Which Cisco IOS configuration snippet accomplishes this task?
ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1

  • A. ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp
    version 11.5.1
    ISR4K(config)# ccm-manager config server 10.1.2.3
    ISR4K(config)# ccm-manager config
    ISR4K(config)# ccm-manager mgcp
    ISR4K(config)# mgcp
    ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1
  • B. ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp
    version 0.1
    ISR4K(config)# ccm-manager config server 10.1.2.3
    ISR4K(config)# ccm-manager config
    ISR4K(config)# ccm-manager mgcp
    ISR4K(config)# mgcp
  • C. ISR4K(config)# mgcp call-agent 10.1.2.3 2428 service-type mgcp
    version 0.1
    ISR4K(config)# ccm-manager config server 10.1.2.3
    ISR4K(config)# ccm-manager config
    ISR4K(config)# ccm-manager mgcp
    ISR4K(config)# mgcp
    ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1
  • D. ISR4K(config)# mgcp call-agent 10.1.2.3 2427 service-type mgcp
    version 0.1
    ISR4K(config)# ccm-manager config server 10.1.2.3
    ISR4K(config)# ccm-manager config download
    ISR4K(config)# ccm-manager mgcp
    ISR4K(config)# mgcp
    ISR4K(config)# ip tftp source-interface GigabitEthernet 0/0/1

Answer: B


NEW QUESTION # 208
What is the traffic classification for voice and video conferencing?

  • A. Voice is classified as CoS 4, and video conferencing is CoS 5.
  • B. Video conferencing is classified as CoS 1, and voice is CoS 2.
  • C. Voice is classified as CoS 5, and video conferencing is CoS 4.
  • D. Voice and video conferencing are both classified is CoS 3.

Answer: D


NEW QUESTION # 209
An engineer configures Cisco Unified Communications Manager to prevent toll fraud.
At which two point does the engineer block the pattern in Cisco Unified CM to complete this task?
(Choose two.)

  • A. translation pattern
  • B. CSS
  • C. route group
  • D. partition
  • E. route pattern

Answer: A,E

Explanation:
If we focus on patterns only, both translation pattern & route pattern have the ability to check box (block this pattern).


NEW QUESTION # 210
An engineer is designing a high availability and failover solution for two Cisco Unified Border Element routers. The first router (cube 1.abc.com) takes 60% of the calls and the second router (cube2 abc.com) takes 40% of the calls. Assume all DNS A records have been created. Which two SRV records are needed for a load balanced solution? (Choose two.)

  • A. _sip_udp.abc.com 60 IN SRV 1 60 cube1.abc.com
  • B. _sip_udp.abc.com 60 IN SRV 3 60 cube2.abc.com
  • C. _sip_udp.abc.com 60 IN SRV 60 1 cube1abc.com
  • D. _sip_udp.abc.com 60 IN SRV 1 40 cube2.abc.com
  • E. _sip_udp.abc.com 60 IN SRV 2 60 cube1.abc.com

Answer: A,D


NEW QUESTION # 211
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider. Which set of commands allows the engineer to complete the task without compromising voice quality?

  • A. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
    codec mp4a-latm
  • B. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
    codec ilbc mode 20
  • C. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
  • D. dial-peer voice 1 voip
    translation-profile outgoing Strip9
    max-conn 5
    destination-pattern 91[2-9]..[2-9]......$
    session protocol sipv2
    session target ipv4:142.45.10.1
    dtmf-relay rtp-nte sip-notify sip-kpml
    codec aacld

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/cube- codec-basic.html


NEW QUESTION # 212
An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?

  • A. Create a user profile in Jabber Policies.
  • B. Upload the jabber-config.enc file to TFTP
  • C. Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.
  • D. Deploy jabber-config-user.xml on iOS and Android devices.

Answer: C


NEW QUESTION # 213
Refer to the exhibit. An engineer must configure a SIP route pattern using domain routing with destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3. How must the IPV4 pattern be configured?

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_ C95ABA82_00_admin-guide-100/ CUCM_BK_C95ABA82_00_admin-guide-100_chapter_0100111.pdf


NEW QUESTION # 214
A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result.
Which two configuration changes resolve the issues? (Choose two.)

  • A. Use Cisco Unified Border Element to debug the calls.
  • B. Disable call forwarding on the phone.
  • C. Mark patterns as off-net or on-net.
  • D. Modify the Block OffNet to OffNet Transfer service parameter.
  • E. Make the calls route through a firewall.

Answer: C,D

Explanation:
We can classify the calls as offnet on route patterns and then enable the service parameter to block offnet to offnet calls.


NEW QUESTION # 215
An engineer configures a SIP trunk for MWI between a Cisco UCM cluster and Cisco Unity Connection. The Cisco UCM cluster fails to receive the SIP notify messages. Which two SIP trunk settings resolve this issue? (Choose two.)

  • A. accept unsolicited notification
  • B. accept out-of-band notification
  • C. allow charging header
  • D. transmit security status
  • E. accept out-of-dialog refer

Answer: A,E


NEW QUESTION # 216
Which filed id configured to change the caller ID information on a SIP route pattern?

  • A. Called party Transformation Mask
  • B. Connected Line ID Presentation
  • C. Calling party transformation Mask
  • D. Route partition

Answer: C


NEW QUESTION # 217
Refer to the exhibit.

When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?

  • A. SIP TLS (A) +SIP TLS (B) +SIP TLS (C)
  • B. SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)
  • C. IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)
  • D. SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)

Answer: D


NEW QUESTION # 218
Which attribute contains an XMPP stanza?

  • A. iq
  • B. presence
  • C. message
  • D. type

Answer: D


NEW QUESTION # 219
How can an engineer determine location-based CAC bandwidth requirements for Cisco Unified Communications Manager?

  • A. Calculate the number of calls against the license for Cisco Unified Border Element to determine calls per location.
  • B. Add the requirements for each audio and video codec and how many calls must be supported.
  • C. Set the requirements in the service parameters.
  • D. Execute the Resource Reservation Protocol to return location-based requirements.

Answer: C


NEW QUESTION # 220
A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronized User in Cisco UCM. Which step is next to remove this user from Cisco UCM?

  • A. Restart the Dirsync service after the user is deleted from LDAP directory.
  • B. Execute a manual sync to refresh the local database and delete the end user.
  • C. Wait 24 hours for the garbage collector to remove the user.
  • D. Delete the user directly from Cisco UCM.

Answer: C


NEW QUESTION # 221
Refer to the exhibit. CUBE_1 and CUBE_2 must use the G.729r8 codec when communicating.
Which action completes the configuration?

  • A. Reset the dial peer on CUBE_1.
  • B. Deploy a voice class to CUBE_2.
  • C. Set dtmf-relay sip-notify on CUBE_1.
  • D. Configure a transcoder on CUBE_1.

Answer: A


NEW QUESTION # 222
Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two.)

  • A. A data file in Extensible Markup Language format must be uploaded to Cisco UCM
  • B. A server template must be created in Cisco UCM
  • C. A device template must be created in Cisco UCM
  • D. A data file in comma-separated values format must be uploaded to Cisco UCM
  • E. A data file in Abstract Syntax Notation One format must be uploaded to Cisco UCM

Answer: C,D

Explanation:


NEW QUESTION # 223
Refer to the exhibit.

The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?

  • A. The translation rule is matched and the translated number is 025553431234.
  • B. The translation rule is not matched because DNIS does not end with a "$".
  • C. The translation rule is not matched because DNIS contains "-".
  • D. The translation rule is matched and the translated number is 02553431234.

Answer: D


NEW QUESTION # 224
Which open-standard protocol is the basis for the Extensible Messaging and Presence Protocol?

  • A. Json
  • B. XML
  • C. SIP
  • D. HTTP

Answer: B


NEW QUESTION # 225
Which command in the MGCP gateway configuration defines the secondary Cisco Unified Communications Manager server?

  • A. ccm-manager fallback-mgcp
  • B. Mgcpapp
  • C. ccm-manager redundant-host
  • D. Mgcp call-agent

Answer: C


NEW QUESTION # 226
An engineer is going to redesign a network, and while looking at the QoS configuration, the engineer sees that a portion of the network is marked with AF42. Which type of traffic is marked with this tag?

  • A. voice
  • B. signaling
  • C. video conference
  • D. streaming video

Answer: D


NEW QUESTION # 227
Which DHCP option must be set up for new phones to obtain the TFTP server IP address?

  • A. Option 66
  • B. Option 6
  • C. Option 120
  • D. Option 15

Answer: A


NEW QUESTION # 228
What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

  • A. The phone and access layer switch negotiate the classification of packets.
  • B. Cisco UCM determines how the voice packets are classified.
  • C. The voice packets are classified by the phone, and the classification is accepted.
  • D. The voice packets are not trusted, and the access layer switch reclassifies the packets.

Answer: C

Explanation:
https://www.ccexpert.us/qos-implementing/qos-trust-boundary-in-the-lan-classify-and-mark- where.html


NEW QUESTION # 229
......


Passing the Cisco 350-801 exam is an excellent way to demonstrate your expertise in Cisco Collaboration Core Technologies. Implementing and Operating Cisco Collaboration Core Technologies certification exam is an essential requirement for the Cisco Certified Specialist - Collaboration Core certification. By passing 350-801 exam, you can validate your skills and knowledge and enhance your career prospects in the field of Cisco Collaboration. The Cisco 350-801 exam is a challenging but rewarding test that can help you take your career to new heights.

 

Penetration testers simulate 350-801 exam: https://www.vcedumps.com/350-801-examcollection.html

Free Test Engine For Implementing and Operating Cisco Collaboration Core Technologies Certification Exams: https://drive.google.com/open?id=1jKPzkZuxHlFFm2WH4Vqn44zxXxlhhKsb