[Oct 16, 2023] 301a Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass 301a Exam - Real Test Engine PDF with 150 Questions
F5 301a exam is a challenging exam that requires a deep understanding of F5 BIG-IP LTM solutions. To pass the exam, candidates must demonstrate their knowledge of F5 BIG-IP LTM solutions and their ability to design, implement, and manage F5 BIG-IP LTM solutions. BIG-IP LTM Specialist: Architect Set-Up & Deploy certification exam is designed to validate the skills and knowledge of IT professionals who are responsible for the architecture, set-up, and deployment of F5 BIG-IP LTM solutions, and who are committed to delivering reliable, efficient, and secure application delivery networking solutions.
F5 301a certification exam covers a range of topics related to BIG-IP LTM solutions, including architecture, deployment scenarios, virtual servers, traffic management, and SSL offloading. To pass the exam, candidates must be able to demonstrate a deep understanding of these topics and their practical applications in real-world scenarios. With a passing score on the F5 301a exam, IT professionals can differentiate themselves from their peers and gain recognition for their expertise in BIG-IP LTM solutions.
NEW QUESTION # 82
An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address.
How should the ITM Specialist block the attempts without affecting other users?
- A. Packet filter
- B. Device trust
- C. Port lockdown
- D. SSH IP allow list
Answer: A
NEW QUESTION # 83
An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?
- A. Stateless
- B. Performance (HTTP)
- C. Standard
- D. Forwarding (IP)
- E. Performance
Answer: C
NEW QUESTION # 84
TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich, Which health monitor setting should be used to verify that the firewalls are able to forward traffic?
- A. Transparent
- B. Reverse
- C. Adaptive
- D. Up internal
Answer: A
Explanation:
Sandwich architect firewalls are generally deployed transparently. You can enable Transparent to point to the next-hop address of the firewall and associate it with the firewall pool member for detection.
NEW QUESTION # 85
An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.
Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.
Which settings should the LTM Specialist configure in the client SSL profile?
- A. set the Renegotiate Max Record Delay to 30
- B. enable Require Peer SN1 Support
- C. set the Handshake Timeout to 30 seconds
- D. set the Renegotiate Period to 30 seconds
Answer: D
NEW QUESTION # 86
An LTM Specialist observes decreased performance and intermittent connection reap LTM system.
Based on the configuration, which action will address these issues?
- A. Use a default caching profile on the virtual server.
- B. Use a shorter idle timeout on the TCP profile.
- C. Use a FastL4 profile on the virtual server
- D. Use an optimized TCP profile.
Answer: B
NEW QUESTION # 87
A Web Server Administrator uses a manual process to display a page when the service is down.
Which feature on the LTM device should be used to automate the service down page? :
- A. Fallback Host
- B. Action on Service Down
- C. Redirect Rewrite
- D. Enable Request Queueing
Answer: A
NEW QUESTION # 88
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
- B. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
- C. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
Answer: C
NEW QUESTION # 89
An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?
- A. the Dashboard
- B. the AVR module
- C. the Performance panel
- D. the Statistics panel
Answer: B
NEW QUESTION # 90
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?
- A. SNAT automap enabled
- B. A SNAT pool with 4 IP addresses
- C. A SNAT pool with IP address
Explanation
One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough - D. A static SNAT
Answer: B
NEW QUESTION # 91
Refer to the exhibit.
An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?
- A. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
- B. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}
- C. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip
- D. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
Answer: C
NEW QUESTION # 92
The picture belongs to static content, you can configure static content cache in FS to meet this demand An LTM Specialist must configure session persistence for a highly available, highly utilized web-based application.
* The following requirements are provided:
* http proxy setup for security
persistence information available to the HA peer in case of failover
The LTM Specialist needs to minimize additional burden on the LTM device to the greatest extent possible.
Which persistence profile should be used?
- A. Destination Address Affinity
- B. Source Address Affinity
- C. Universal
- D. Cookie insert
Answer: D
NEW QUESTION # 93
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.50.0.2
- B. 10.20.0.1
- C. 192.168.0.10
- D. 10.20.0.2
Answer: D
NEW QUESTION # 94
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?
- A. Gateway pool monitor
- B. iRule
- C. Gateway Fail Safe
- D. Gateway pool
Answer: C
NEW QUESTION # 95
A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.
- A. Stateless
- B. Standard
- C. Performance (Layer 4)
- D. Forwarding (Layer 2)
Answer: B
NEW QUESTION # 96
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. ...BEGIN CERTIFICATE....
- B. --START CERTIFICATE....
- C. ...SSL CERTIFICATE....
- D. ...SECURITY CERTIFICATE....
Answer: A
NEW QUESTION # 97
AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?
- A. The value for UP interval is enable with a value greater than 0
- B. The value of Manual Resume is set to No
- C. The value for Manual Resume is set to Yes
- D. The parameter Time Until UP has a value greater than 0
Answer: C
NEW QUESTION # 98
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create pool http_pool members {10.10.10.101:80}
- B. # tmsh create pool http_pool members add {10.10.10.101:80}
- C. # tmsh create it pool http_pool members {10.10.10.101:80}
- D. # tmsh create itm pool http_pool member {10.10.10.101:80}
Answer: C
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION # 99
Refer to the exhibit.
The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?
- A. LTM1: Traffic Group C
LTM2: Traffic Groups A, B, and 0 - B. LTM1: Traffic Groups B and C
LTM2: Traffic Groups A and 0 - C. LTM1: No Traffic Groups
LTM2: Traffic Groups A, B, C, and D - D. LTM1: Traffic Groups A, B, C, and D
LTM2: No Traffic Groups
Answer: C
Explanation:
If the 1.4 port is down and failsafe is triggered, the whole machine will become a standby, and all Traffic Groups will be cut away, and no Traffic Group will remain.
NEW QUESTION # 100
An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting https://register.example.com to a set of three web servers. Persistence needs to be ensured. No persistence mirroring is allowed SSL offloading is required.
A fourth web server with fewer resources will be used to handle requests from engine bots to https://register.example.comvrobots.txt by an iRule. The (Rule will use the HTTP_REQUEST event. .
What are the required profile and persistence settings to implement this
- A. tcp, clientssl, serverssl, ssl persistence
- B. tcp. dientssl, hup, source address persistence
- C. tcp, clientssl, http. cookie persistence
- D. tcp, clientssl, http, serverssl cookie persistence
Answer: C
Explanation:
The option is wrong, it should be clientssl and serverssl. If the title requires ssl offload instead of encryption, you need clientssl instead of serverssl. irule needs HTTP profile to enable HTTP_REQUEST. If the session cannot be mirrored, the cookie session remains to meet the demand.
NEW QUESTION # 101
A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.
Which of the following two tasks must be completed to meet the requirements? (Choose two)
- A. configure the client SSL profile with the Trusted .Certificate Authorities
- B. configure the server SSL profile with "Client Certificate" Set to require
- C. configure the client SSL profile with "Client Certificate" set to require
- D. generate a CSR to register a certificate with the CA
- E. instruct the desktop team to update the web browser to the most recent release
Answer: A,C
NEW QUESTION # 102
A virtual server is experiencing intermittent port exhaustion. What should be done to fix this issue?
- A. enable SNAT automap
- B. enable advanced routing
- C. add more pool members
- D. add more SNAT addresses
Answer: D
NEW QUESTION # 103
An LTM Specialist needs to terminate client SSL traffic and based on the cookie presented by client.
Which set of profiles should the LTM Specialist use?
- A. HTTPS, Client SSL, Cookie Persistence Profile
- B. HTTP, Server SSL, SSL Cookie Profile
- C. HTTPS, Server SSL, SSL Cookie Profile
- D. HTTP, Client SSL, Cookie Persistence Profile,
Answer: D
NEW QUESTION # 104
An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?
- A. Match across Pool Members
- B. Match across Virtual Servers
- C. Match across Services
- D. Match across Polls
Answer: B
NEW QUESTION # 105
An LTM Specialist must create a new virtual server for HTTP access. The LTM Specialist creates a forwarding virtual server to reach the resource.
What is a potential result of this action?
- A. HTTP traffic is NOT allowed
- B. Packet filter allowances are also required
- C. IP conflict result
- D. Other service ports could be allowed
Answer: A
NEW QUESTION # 106
......
F5 301a (BIG-IP LTM Specialist: Architect Set-Up & Deploy) Certification Exam is a comprehensive exam that tests a candidate's ability to design, configure, and deploy F5 BIG-IP Local Traffic Manager (LTM) solutions. BIG-IP LTM Specialist: Architect Set-Up & Deploy certification exam is ideal for IT professionals who are seeking to advance their careers in the field of network infrastructure and security. 301a exam is designed to test a candidate's knowledge of the BIG-IP LTM architecture and its various components.
Get New 301a Certification Practice Test Questions Exam Dumps: https://www.vcedumps.com/301a-examcollection.html
Real 301a Exam Dumps Questions Valid 301a Dumps PDF: https://drive.google.com/open?id=11hZS80HOK_Lmc7BW93Bf_StVjeALtvEm
