Use Free 301a Exam Questions that Stimulates Actual EXAM
Get 100% Real 301a Free Online Practice Test
The F5 301a exam covers a range of topics, including designing and deploying BIG-IP LTM solutions, configuring advanced LTM features, managing BIG-IP LTM environments, and troubleshooting common issues. To pass the exam, candidates must demonstrate their ability to configure and manage BIG-IP LTM solutions in a variety of scenarios, as well as their knowledge of F5 products and technologies. Successful completion of the exam is a valuable credential for IT professionals who work with F5 BIG-IP solutions and are seeking to advance their careers in this field.
The F5 301a certification exam is designed for individuals who want to become a certified BIG-IP LTM Specialist: Architect Set-Up & Deploy. This certification exam assesses the candidate's knowledge about setting up and deploying BIG-IP Local Traffic Manager (LTM) systems and their ability to design, implement and manage complex LTM solutions. The exam includes multiple-choice questions that cover a wide range of topics including virtual server configuration, traffic management, high availability, security, and troubleshooting. The F5 301a certification is recognized globally and is highly valued by employers in the IT industry.
NEW QUESTION # 43
A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:
Which action should be taken to correct this issue?
- A. change the profile set on the virtual server to TCP
- B. change the profile set on the virtual server To TCP/UDP
- C. add a TCP prone to the existing virtual server.
- D. create a new virtual server with the service port of 53 and the protocol set to TC
Answer: D
NEW QUESTION # 44
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- B. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
- C. a custom TCP monitor that works on port 9080,
- D. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
- E. a custom TCP monitor that works on port 8080
- F. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
Answer: D,E
NEW QUESTION # 45
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?
- A. Gateway Fail Safe
- B. Gateway pool monitor
- C. Gateway pool
- D. iRule
Answer: A
NEW QUESTION # 46
An LTM Specialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.
Which configuration should the LTM Specialist use to meet the requirement?
- A. Modify the default traffic group of the Common partition to TG2
- B. Restrict the Traffic Group Access of BIG-I Managers to TG2
- C. Move the BIG-IP Managers from TG1 to TG2
- D. Create a new partition and set the default traffic group to TG2
Answer: D
NEW QUESTION # 47
An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?
- A. Match across Virtual Servers
- B. Match across Services
- C. Match across Polls
- D. Match across Pool Members
Answer: A
NEW QUESTION # 48
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
- B. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
- C. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
Answer: C
NEW QUESTION # 49
A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.
- A. Stateless
- B. Performance (Layer 4)
- C. Standard
- D. Forwarding (Layer 2)
Answer: C
NEW QUESTION # 50
A pool has four members. Ail of the servers have been designed and configured with the same application. Each client's request can significantly the performance of the servers.
Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?
- A. Least Connections
- B. Ratio
- C. Priority Group
- D. Observed
Answer: A
NEW QUESTION # 51
A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.
Which of the following two tasks must be completed to meet the requirements? (Choose two)
- A. configure the client SSL profile with the Trusted .Certificate Authorities
- B. instruct the desktop team to update the web browser to the most recent release
- C. configure the client SSL profile with "Client Certificate" set to require
- D. configure the server SSL profile with "Client Certificate" Set to require
- E. generate a CSR to register a certificate with the CA
Answer: A,C
NEW QUESTION # 52
An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?
- A. the AVR module
- B. the Statistics panel
- C. the Performance panel
- D. the Dashboard
Answer: A
NEW QUESTION # 53
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)
- A. http-transparent
- B. stream
- C. http
- D. http compression
- E. webacceleration
Answer: C,E
NEW QUESTION # 54
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?
- A. Load Aware
- B. HA Capacity
- C. HA Group
- D. Ordered List
Answer: D
NEW QUESTION # 55
Refer to the exhibit.
The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?
- A. LTM1: Traffic Group C
LTM2: Traffic Groups A, B, and 0 - B. LTM1: Traffic Groups A, B, C, and D
LTM2: No Traffic Groups - C. LTM1: No Traffic Groups
LTM2: Traffic Groups A, B, C, and D - D. LTM1: Traffic Groups B and C
LTM2: Traffic Groups A and 0
Answer: C
Explanation:
If the 1.4 port is down and failsafe is triggered, the whole machine will become a standby, and all Traffic Groups will be cut away, and no Traffic Group will remain.
NEW QUESTION # 56
Refer to the exhibit.
An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?
- A. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
- B. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
- C. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}
- D. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip
Answer: D
NEW QUESTION # 57
An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:
A list of the monitor configuration shows the following:
Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)
- A. also assign a gatewayjcmp monitor to the pool
- B. add a reverse string to the game monitor
- C. enable manuai-resume on the same monitor
- D. enable reverse and wait for the next connection
- E. increase the timeout to three times the interval
Answer: A,B
NEW QUESTION # 58
An LTM Specialist discovers an issue with the custom http monitor that returns in a false positive status.
The end users cannot get the right website, but the http monitor marks the pool member UP.
What is causing the false positive result?
- A. The response is chunked.
- B. The end user should use another type of browser.
- C. The Content-Type has value "iso-8859-200".
- D. The response is compressed.
Answer: C
NEW QUESTION # 59
Refer to the Exhibit.
An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 60
Which process can be eliminated by terminating SSL communication on the LTM device rather than the backend pool members?
- A. applying security patches on the backend pool members
- B. administering SSL on the web servers
- C. generating CSRS
- D. obtaining SSL certificates from a certificate authority
Answer: B
NEW QUESTION # 61
A virtual server is configured to handle https traffic. The clientssl profile is configured to use a2048-bit RSA key. Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.
What two effects will this change have on the BIG-IP device? (Choose two)
- A. Increased of concurrent connection on client-side
- B. Increase of TLS Renegotiation
- C. Increase of CPU usage on the BIG-IP device
- D. Decrease to 20% of licensed TPS
- E. Decrease to 90% of licensed TPS
Answer: C,D
NEW QUESTION # 62
An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?
- A. Performance
- B. Performance (HTTP)
- C. Stateless
- D. Standard
- E. Forwarding (IP)
Answer: D
NEW QUESTION # 63
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter "environment=development" to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?
- A. tcp, http, clientssl
- B. tcp, clientssl, serverssl
- C. http, clientssl, persistence
- D. tcp, http, request logging
Answer: A
NEW QUESTION # 64
......
BEST Verified F5 301a Exam Questions (2023) : https://www.vcedumps.com/301a-examcollection.html
The Best Practice Test Preparation for the 301a Certification Exam: https://drive.google.com/open?id=1UxVmdBXTV6Qa9c6zp6XDnSjAHwBFxG6H
